| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| CM |
| | - Testing concrete Methods for analysis of hardened concrete Determination of Chloride content in hardened concrete
| BS 1881 Part 124 Clause 10.2 | Active
|
- Testing concrete Methods for analysis of hardened concrete Determination of Sulphate content in hardened concrete
| BS 1881 Part 124 Clause 10.3 | Active
|
| - Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the sulphate content of soil and ground water- Preparation of soil and its water extract
| BS 1377 Part 3 Clause 5.3 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the sulphate content of soil and ground water: - Preparation of soil and its acid extract - Gravimetric method for analysis of acid or water extract or ground water
| BS 1377 Part 3 Clause 5.2 & 5.5 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the PH Value
| BS 1377 Part 3 Clause 9 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the chloride content- Determination of water-soluble chloride content
| BS 1377 Part 3 Clause 7.2 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the chloride content -Determination of acid-soluble chloride content
| BS 1377 Part 3 Clause 7.3 | Active
|
| - Methods of test for soils for civil engineering purposes. Part 9: In-situ tests Sand replacement method suitable for fine, medium-grained soils and coarse-grained soils (large and small pouring cylinder method)
| BS 1377 Part 9 Clause 2.2 | Active
|
- Methods of test for soils for civil engineering purposes. Part 2: Classification tests Determination of particle size distribution: Wet and Dry sieving method
| BS 1377 Part 2 Clauses 9.2 & 9.3 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties Determination of California Bearing Ratio (CBR)
| BS 1377 Part 2 Clause 15 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties Determination of dry density/water content relationship
| BS 1377 Part 2 Clause 11.5 & Clause 11.6 | Active
|
- Methods of test for Soils for civil engineering purposes Part 2- Classification Tests clause 9: Determination of particle size distribution 9.5: Sedimentation by the hydrometer method
| BS 1377 Part 2 Clause 9.5 Amd 9027(96) | Active
|
- Methods of test for Soils for civil engineering purposes Part 2- Classification Tests Clause 4: Determination of the liquid limit: • 4.3: Cone penetrometer method (definitive method) • 4.4: One-point cone penetrometer method Clause 5: Determination of the plastic limit and plasticity index: • 5.3: Method for plastic limit • 5.4: Derivation of plasticity index and liquidity index
| BS 1377 Part 2 Clause 4.3; Clause 4.4; Clause 5.3 & Clause 5.4 Amd 9027(96) | Active
|
- Geotechnical investigation and testing Laboratory testing of soil Part 1: Determination of water content
| BS 1377 Part 2 Clause 4.1 BS EN 17892 Part 1+A1 | Active
|
| - Testing hardened concrete. Part 1: Shape, dimensions and other requirements for specimens and moulds
| BS EN 12390 Part 1 | Active
|
- Testing hardened concrete. Part 2: Making and curing specimens for strength tests
| BS EN 12390 Part 2 | Active
|
- Testing hardened concrete. Part 3: Compressive strength of test specimens
| BS EN 12390 Part 3 | Active
|
- Testing hardened concrete. Part 7: Density of hardened concrete
| BS EN 12390 Part 7 | Active
|
- Testing hardened concrete. Part 8: Depth of penetration of water under pressure
| BS EN ISO 12390 Part 8 | Active
|
- Testing concrete. Method for determination of compressive strength of concrete cubes
| BS 1881 Part 116 | Active
|
- Determination of water absorption on hardened concrete
| BS 1881 Part 122 +A1 | Active
|
- Determination of Water Permeability
| DIN 1048 Part 5 | Active
|
- Testing concrete. Methods for determination of density of hardened concrete
| BS 1881 Part 114, AMD 6098, AMD 6721 | Active
|
- Testing concrete Part 111: Method of normal curing of test specimens (20°C method)
| BS 1881 Part 111, AMD 6102, AMD 9387 | Active
|
| - Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product- Specification Steel bend tests
| BS 4449 Appendix C, Clause C.1.6.1 BS EN 15630 Part 1 | Active
|
- Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product- Specification Steel tensile strength test
| BS 4449 + A3 BS EN 15630 Part 1 ISO 6892 Part 1 | Active
|
- Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product- Specification Steel re bend tests
| BS 4449 +A3 BS EN 15630 Part 1 | Active
|
| - Precast concrete masonry units Part 1: Specification for precast concrete masonry units Measurement of dimension
| BS 6073 Part 1 Appendix A | Active
|
- Precast concrete masonry units Part 2: Method for specifying precast concrete masonry units Routine rapid control test of compressive strength of blocks by manufacturer (fibre board test)
| BS 6073 Part 2 Appendix B | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks Determination of compressive strength
| BS 6717 Part 1 Annex A-B | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks Measurement of dimensions and plan area
| BS 6717 Part 1 Annex A-B | Active
|
| GI |
| | - Code of practice for Site Investigation Ground water level measurement
| BS 5930 Section 4 Clause 4.26 & Section 8 Clause 52 | Active
|
- Code of practice for Site Investigation Ground water sampling
| BS 5930 Section 4 Clause 26.4 | Active
|
| - Methods of test for soils for civil engineering purposes. Part 9: In-situ tests In-situ penetration tests- Determination of the penetration resistance using the split-barrel sampler (the standard penetration test SPT)
| BS 1377 Part 9 Section 3.3 | Active
|
- Code of practice for Site Investigation Soil sampling
| BS 5930 Section 4 Clause 25.6 | Active
|
- Code of practice for Site Investigation Soil description
| BS 5930 Section 6 | Active
|
| - Code of practice for Site Investigation Rock quality designation
| BS 5930 Section 6 | Active
|
- Code of practice for Site Investigation Core recovery
| BS 5930 Section 6 | Active
|
- Code of Practice for Site Investigations Geotechnical Reporting
| BS 5930 Section 10 | Active
|
- Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
| ASTM D7012 | Active
|
- Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
| ASTM D4543 | Active
|
| | - Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of pH value of Ground Water
| BS 1377 Part3 Clause 9 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the chloride content-Determination of acid-soluble chloride content
| BS 1377 Part 3 Clause 7.3 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the sulphate content of soil and ground water: - Preparation of soil and its acid extract - Gravimetric method for analysis of acid or water extract or ground water
| BS 1377 Part 3 Clause 5.2 & 5.5 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the chloride content- Determination of water-soluble chloride content
| BS 1377 Part 3 Clause 7.2 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the sulphate content of soil and ground water- Preparation of soil and its water extract
| BS 1377 Part 3 Clause 5.3 | Active
|
| - Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the chloride content- Determination of water-soluble chloride content
| BS 1377 Part 3 Clause 7.2 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the sulphate content of soil and ground water- Preparation of ground water for testing
| BS 1377 Part 3 Clause 5.4 | Active
|
- Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests Determination of the PH Value
| BS 1377 Part 3 Clause 9 | Active
|
| Pile |
| | - Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
| ASTM D4945 and Mukaddam Internal Method Statement MIMS-03 | Active
|
- Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
| ASTM D6167 | Active
|
- Standard Test method for Integrity Testing of Concrete Deep Foundation by Ultrasonic Cross hole Testing
| ASTM D6760 | Active
|
- Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
| ASTM D5882 and Mukaddam Internal Method Statement MIMS-05 | Active
|
