| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Geotechnical Investigation |
| | - Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
| ASTM D3080 / D3080M | Active
|
- Standard Test Methods for Crosshole seismic testing
| ASTM D4428/D4428M | Active
|
- Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
| ASTM D5777 | Active
|
- Standard Test Method for Standard Penetration Test (SPT) and split barrel sampling of soils
| ASTM D1586 | Active
|
- Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
| ASTM D2850 | Active
|
- Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
| ASTM D4767 | Active
|
- Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
| ASTM D5778 | Active
|
- Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
| ASTM D2435/2435M | Active
|
| Construction Materials |
| | - Standard Test Method for Particle-Size Analysis of Soils
| ASTM D422 | Active
|
- Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
| ASTM D1140 | Active
|
- Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
| ASTM D4318 | Active
|
- Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
| ASTM C117 | Active
|
- Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³(2,700 kN-m/m³))
| ASTM D1557 | Active
|
- Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
| ASTM D2216 | Active
|
- Standard Test Methods forIn-Place Density and Water Content of Soil and Soil- Aggregate by Nuclear Methods (Shallow Depth)1
| ASTM D6938 | Active
|
- Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
| ASTM D854 | Active
|
- Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
| ASTM D1883 | Active
|
- Standard Test Method for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
| ASTM D4253 | Active
|
- Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
| ASTM D4254 | Active
|
- Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
| ASTM D3282 | Active
|
- Standard Test Method for Classification of Soil for Engineering Purposes (Unified Soil Classification System)
| ASTM D2487 | Active
|
- Standard Test Method for particle – size Distribution(Gradation) of Soil Using Sieve Analysis
| ASTM D6913 | Active
|
- Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
| ASTM C136 | Active
|
- Standard Test Method for Clay Lumps and Friable Particles in Aggregates
| ASTM C142 / C142M | Active
|
| - Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
| ASTM C131 / C131M | Active
|
- Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
| ASTM C535 | Active
|
- Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
| ASTM C88 | Active
|
- Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
| ASTM C127 | Active
|
- Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
| ASTM C128 | Active
|
- Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
| ASTM D4791 | Active
|
- Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
| ASTM D2419 | Active
|
- Standard Practice for Reducing Samples of Aggregate to Testing Size
| ASTM C702/C702M | Active
|
- Standard Practice for Sampling Aggregates
| ASTM D75 | Active
|
- Standard Test Method for Lightweight particles in Aggregate
| ASTM C123M | Active
|
- Concrete, Mortar and grout
| - Standard Practice for Sampling Freshly Mixed Concrete
| ASTM C172/C172M | Active
|
- Standard Practice for Making and Curing Concrete Test Specimens in the Field
| ASTM C31/C31M | Active
|
- Standard Test Method for Slump of Hydraulic-Cement Concrete
| ASTM C143/C143M | Active
|
- Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
| ASTM C231/C231M | Active
|
- Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
| ASTM C109/C109M | Active
|
- Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
| ASTM C579 | Active
|
- Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
| ASTM C39/C39M | Active
|
- Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
| ASTM C42/C42M | Active
|
- Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
| ASTM C192/C192M | Active
|
- Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
| ASTM C1064/C1064M | Active
|
- Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
| ASTM C511 | Active
|
- Standard Practice for Capping Cylindrical Concrete Specimens
| ASTM C617/C617M | Active
|
- Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
| ASTM C1231/C1231M | Active
|
- Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
| ASTM D1005 | Active
|
| - Standard Test Method for Nondestructive Measurement of Dry Film Thickness Of Applied Organic Coatings Using Ultrasonic Coating Thickness Gage
| ASTM D6132 | Active
|
- Standard Test Method for Rebound Number of Hardened Concrete
| ASTM C805 | Active
|
| - Standard Practice for Sampling Bituminous Paving Mixtures
| ASTM D979/D979M | Active
|
- Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
| ASTM D2172/D2172M | Active
|
- Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
| ASTM D1461 | Active
|
- Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
| ASTM D6926 | Active
|
- Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
| ASTM D6927 | Active
|
- Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
| ASTM D5444 | Active
|
- Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
| ASTM D2041/D2041M | Active
|
- Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors
| ASTM D2995 | Active
|
- Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
| ASTM D2726/D2726M Clause 10.2 | Active
|
- Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
| ASTM D3549 / D3549M | Active
|
- Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
| ASTM D5361 / D5361M | Active
|
- Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
| ASTM D3203/D3203M | Active
|
| | - Standard Test Methods for pH of Water
| ASTM D1293 | Active
|
- Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
| ASTM D5907 | Active
|
- Standard Test Method for Chloride Ion in Water
| ASTM D512 (Method A) | Active
|
- Standard test Methods for Sulfate Ion in Water
| ASTM D516 | Active
|
| - Testing aggregates. Method for determination of water-soluble chloride salts
| BS 812 Part 117 Clause C3 | Active
|
- Testing aggregates. Methods for determination of sulphate content
| BS 812 Part 118 Section 6 | Active
|
- Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
| ASTM C40 / C40M | Active
|
| - Testing Concrete Methods for analysis of hardened concrete (Determination of Chloride content in hardened concrete)
| BS 1881 Part 124 Clause 10.2 | Active
|
- Testing Concrete Methods for analysis of hardened concrete (Determination of Sulphate content in hardened concrete)
| BS 1881 Part 124 Clause 10.3 | Active
|
