| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Metallurgical |
| - Reinforced Bars. Steel Columns, Steel Channels, Steel Plates, Steel Pipes, Steel Fasteners, Anchor Bolts
| - Standard Test methods And Definitions for Mechanical testing of Steel Products Tensile Test(Ambient temperature)
| ASTM A370 | Active
|
- Metallic Materials-Tensile Testing Part 1: Method of Test at room temperature Tensile (Ambient Temperature)
| ISO 6892:19 Part 1 | Active
|
- Standard Test methods And Definitions for Mechanical testing of Steel Products Charpy Impact test (Ambient to -196°C)
| ASTM A370 | Active
|
- Metallic Materials. Charpy Pendulum Impact test Part 1: Test method Charpy Impact (Ambient to -196°C)
| BS EN ISO 148:16 Part 1 | Active
|
- Standard Test Method for Notched Bar Impact testing of Metallic Materials Charpy Impact (Ambient to -196˚C)
| ASTM E23 | Active
|
- Standard test Methods and definitions for Mechanical testing of Steel Products Hardness: Rockwell Hardness test (Low & Medium Ranges)
| ASTM A370 | Active
|
- Standard Test Methods for Rockwell Hardness of Metallic Materials Hardness: Rockwell (Low & Medium Ranges)
| ASTM E18:22 | Active
|
| - Qualification Standard for Welding and Brazing procedures, welders, brazers, ad welding and brazing operators Bend Test
| ASME Sec IX QW-466.2 | Active
|
- Structural Welding Code-Steel Bend Test
| AWS D1.1:20 | Active
|
- Qualification Standard for Welding and Brazing procedures, welders, brazers, ad welding and brazing operators Cross Weld Tensile (Ambient temperature)
| ASME Sec IX Article I | Active
|
- Structural Welding Code-Steel Cross Weld tensile (Ambient Temperature)
| AWS D1.1:20- Sec. 6.10.3.4 | Active
|
- Structural Welding Code-Steel Charpy Impact (Ambient to -196˚C)
| AWS D1.1 | Active
|
- Qualification Standard for Welding and Brazing procedures, welders, brazers, ad welding and brazing operators Macro Examination
| ASME Sec IX Article I | Active
|
| - Structural Welding Code-Steel Macro Examination
| AWS D1.1 | Active
|
| | - Standard Test Methods for Tension Testing of Metallic Materials
| ASTM E 8 | Active
|
| - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 Bolts , Screws and Studs with specified property classes - Coarse thread and fine pitch thread -Tensile test- section # 9.2
| ISO 898 Part 1 | Active
|
| - RULES ON MATERIALS AND WELDING FOR THE CLASSIFICATION OF MARINE UNITS - BV Standard - NR216 - Chapter 2 - section # 2- Tensile test
| BV Rule NR216 Chapter 2 - section 2 | Active
|
- reinforcement of concrete
| - Steel fo ther reinforcement of concrete- weldable reinforcingsteel - Bar , coil and decoiled product-specification - Tensile test
| BS EN ISO 15630 Part 1 | Active
|
| - Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement - Tensile test
| ASTM A615/615M | Active
|
| - Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
| ASTM E21 | Active
|
| - Structural Welding Code— Aluminum - Cross weld tensile test
| AWS D1.2 Section 3.7 | Active
|
- Structural Welding Code— Stainless steel - Cross weld tensile test
| AWS D1.6 Section 6.9.3.3 | Active
|
- Welding of pipelines and related facilities - Cross weld tensile test - Section # 5.6.2
| API 1104 22nd Edition Section 5.6.2 | Active
|
- Specification and qualification of welding procedures for metallic materials — Welding procedure test - Cross weld tensile test
| BS EN ISO 15614 Part 1 | Active
|
- Destructive tests on welds in metallic materials — Transverse tensile test
| BS EN ISO 4136 | Active
|
- Boiler & Pressure Vessel Code - Tension test
| ASME Section II part C Section 12:23 | Active
|
- Structural Welding Code - Steel - Tension test
| AWS D1.1 A5-36M | Active
|
- Standard Methods for Mechanical Testing of Welds-Tension test
| AWS B4 Section 4 | Active
|
| - Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
| ASTM A770/A770M | Active
|
| - Steel products with improved deformation properties perpendicular to the surface of the product – Technical delivery conditions - Through-Thickness Tension Testing
| BS EN ISO 10164 Section 8.2.2.2.3 | Active
|
| - Boiler & Pressure Vessel Code - Charpy Impact Testing- (Ambient to Minus 196 Deg C )
| ASME SEC II Part C Section 14 | Active
|
- Standard Methods for Mechanical Testing of Welds - Impact Test (Ambient to -196°C)
| AWS B4 Section 7 | Active
|
| - Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread - Charpy Impact Test (Ambient to -196°C)
| ISO 898 Part 1 | Active
|
| - Metallic Material - Rockwell hardness Testing - Test Method (Low & Medium Ranges)
| BS EN ISO 6508 Part 1 | Active
|
- fasteners made of carbon steel and alloy steel
| - Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread - Rockwell hardness Test (Low & Medium Ranges)
| ISO 898 Part 1 | Active
|
| - Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials-Vickers hardness test (HV5,10&30)
| ASTM E 92 | Active
|
| - Metallic materials - Vickershardness test - Part1:Test method (HV5,10&30)
| BS EN ISO 6507 Part 1 | Active
|
| - Rules on Materials and Welding for the Classification of Marine Units - chapter 12-section 3- Vickers hardness test (HV5,10&30)
| BV Rule NR216 Chapter 12 Section 3 item # 2.1.9 | Active
|
- fasteners made of carbon steel and alloy steel
| - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 Bolts , Screws and Studs with specified property classes - Coarse thread and fine pitch thread - Vickers hardness test- section # 9.9 (HV5,10&30)
| ISO 898 Part 1 | Active
|
| - Welding of pipelines and related facilities - Hardness test (HV5,10&30)
| API 1104 22nd Edition Section 10.3.6.4 | Active
|
- Specification and qualification of welding procedures for metallic materials — Welding procedure test - Hardness test (HV5,10&30)
| BS EN ISO 15614 Part 1 Section 7.4.5 | Active
|
| - Petroleum and natural gas industries — Materials for use in H2S containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons - Hardness test (HV5,10&30)
| Nace MR 0175 ISO 15156 Part 1 & 2 Section # 7.3 | Active
|
| - Standard Test Method for Guided Bend Test for Ductility of Welds
| ASTM E190 | Active
|
- Structural Welding Code— Aluminum - Bend test
| AWS D1.2 Section 3.8.2.2 | Active
|
- Structural Welding Code— Stainless steel - Bend Test
| AWS D1.6 Section 6.9.3.2 | Active
|
- Welding of pipelines and related facilities - Bend test
| API 1104 22nd edition Section 5.6.4.3 | Active
|
- Destructive tests on welds in metallic materials — Bend tests
| BS EN ISO 5173 A+1 | Active
|
- Specification and qualification of welding procedures for metallic materials — Welding procedure test - Bend test
| BS EN ISO 15614 Part 1 | Active
|
| - Standard test Methods and definitions for Mechanical testing of Steel Products Bend test
| ASTM A370 | Active
|
- seamless carbon steel pipes
| - Standrad specification for seamless carbon steel pipe for high temperature service - Bend test
| ASTM A106 | Active
|
| - Qualification Standard for Welding and Brazing procedures, welders, brazers, ad welding and brazing operators- Fracture Test (Fillet )
| ASME Sec IX QW-4624 | Active
|
- Structural Welding Code - Steel - Fracture Test (Fillet )
| AWS D1.1 Section 6.23.2.1 | Active
|
- Structural Welding Code— Aluminum - Fracture Test (Fillet )
| AWS D1.2 Section 3.19.4.1 | Active
|
- Structural Welding Code— Stainless steel - Fracture Test (Fillet )
| AWS D1.6 | Active
|
- Welding of pipelines and related facilities - Nick break test
| API 1104 22nd edition Section 5.6.3 | Active
|
| - Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe - Flattening test
| ASTM A530/A530M | Active
|
| - Standard test Methods and definitions for Mechanical testing of Steel Products - Flattening test
| ASTM A370 | Active
|
| - Metallic materials — Tube — Flattening test
| ISO 8492 | Active
|
| - Rules on Materials and Welding for the Classification of Marine Units-Flattening test
| BV Rule NR216 Chapter 1 Section 2 | Active
|
- Threaded Fasteners,Washers
| - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners,Washers,Direct Tension Indicators,and Rivets - Proof Load
| ASTM F 606 | Active
|
| - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 Bolts , Screws and Studs with specified property classes - Coarse thread and fine pitch thread - Proof Load
| ISO 898 Part 1 Section 9.6 | Active
|
| - Standard test Methods and definitions for Mechanical testing of Steel Products - Proof Load
| ASTM A370 | Active
|
- Standard test Methods and definitions for Mechanical testing of Steel Products - Drift test / Flaring
| ASTM A370 | Active
|
| - Rules on Materials and Welding for the Classification of Marine Units-Drift test / Flaring
| BV Rule NR216 Section 2 Item 7.2 | Active
|
| - Metallic materials — Tube — Drift-expanding test
| BS EN ISO 8493 | Active
|
| - Standard test Methods and definitions for Mechanical testing of Steel Products - Flanging test
| ASTM A370 | Active
|
| - Rules on Materials and Welding for the Classification of Marine Units-Flanging test
| BV Rule NR216 | Active
|
| | - Standard Practice for Macroetching Metals and Alloys
| ASTM E340 | Active
|
| - Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
| ASTM E381 | Active
|
- Standard Practice for Microetching Metals and Alloys
| ASTM E407 | Active
|
| - Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
| BS EN ISO 17639 | Active
|
| - Standard Practice for Production and Evaluation of Field Metallographic Replicas
| ASTM E1351 | Active
|
| | - Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels - SODIUM HYDROXIDE ETCH TEST FOR CLASSIFICATION OF ETCH STRUCTURES OF DUPLEX STAINLESS STEELS
| ASTM A923 Method A | Active
|
- Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels - OXALIC ACID ETCH TEST FOR CLASSIFICATION OF ETCH STRUCTURES OF AUSTENITIC STAINLESS STEELS
| ASTM A262 Method A | Active
|
| | - Standard Test Methods for Determining the Inclusion Content of Steel-Microscopic method - Method D - low inclusion content
| ASTM E 45 | Active
|
| - Standard Test Methods for Determining Average Grain Size
| ASTM E112 | Active
|
- Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
| ASTM E562 | Active
|
| | - Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution - Ferric Chloride Pitting Test
| ASTM G48 Method A | Active
|
- Pitting Corrosion Test -Critical pitting temp-Critical Pitting Temperature Test for Nickel-Base and Chromium-Bearing Alloys
| ASTM G48 Method C | Active
|
- Pitting Corrosion Test -FERRIC CHLORIDE CORROSION TEST FOR CLASSIFICATION OF STRUCTURES OF DUPLEX STAINLESS STEELS
| ASTM A923 Method C | Active
|
- Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels - FERRIC SULFATE–SULFURIC SULFURIC ACID TEST FOR DETECTING SUSCEPTIBILITY TO INTERGRANULAR ATTACKING AUSTENITIC STAINLESS STEELS
| ASTM A262 Method B | Active
|
- Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels - COPPER-COPPER SULFATE–16% SULFURIC ACID TEST FOR DETECTING SUSCEPTIBILITY TO INTERGRANULAR ATTACKING AUSTENITIC STAINLESS STEEL
| ASTM A262 Method E | Active
|
| - Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys - Ferric Sulfate—Sulfuric Acid Test
| ASTM G28 Method A | Active
|
- Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking
| NACE TM 0284 | Active
|
- Standard Test Method Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments - Method A - Tensile
| NACE TM 0177 Method A & ASTM G39 | Active
|
- Petroleum and natural gas industries — Materials for use in H₂S containing environments in oil and gas production —General principles for selection of cracking-resistant materials - Method A-Tensile
| NACE MR 0175 ISO 15156 Part 1 & Part 2 | Active
|
- Guidelines on Materials Requirements for Carbon and Low Alloy Steels for H2S Containing Environments in Oil and Gas Production - SSCC-Tensile
| EFC Publications 16 | Active
|
- Standard Test Method Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments - Method B-Four Point Bend
| NACE TM 0177 & ASTM G39 | Active
|
- Petroleum and natural gas industries —Materials for use in H₂S containing environments in oil and gas production —General principles for selection of cracking-resistant materials-Method B-Four Point Bend
| NACE MR 0175 ISO 15156 Part 1& Part 2 | Active
|
- Guidelines on Materials Requirements for Carbon and Low Alloy Steels for H2S Containing Environments in Oil and Gas Production--Method B-Four Point Bend
| EFC Publications 16 | Active
|
- Petroleum and natural gas industries — Materials for use in H₂S containing environments in oil and gas production —General principles for selection of cracking-resistant materials - Stress Oriented Hydrogen Induced Cracking (SOHIC)
| NACE MR 0175 ISO 15156 Part 1& Part 2 | Active
|
| EFC Publications 16 | Active
|
- Standard Practice for Operating Salt Spray (Fog) Apparatus
| ASTM B117 | Active
|
- Corrosion tests in artificial atmospheres — Salt spray tests
| ISO 9227 | Active
|
| | - Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
| ASTM E415 | Active
|
| - Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
| ASTM E1086 | Active
|
