| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Construction Materials |
| | - Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution. Sieving method
| BS EN 933 Part 1 | Active
|
- Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
| ASTM C136/136M | Active
|
- Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
| ASTM C117 | Active
|
- Standard Test Method for Clay Lumps and Friable Particles in Aggregates
| ASTM C142 | Active
|
- Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
| ASTM C128 | Active
|
- Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution. Sieving method (mass of fines passing the 0.063mm sieve)
| BS EN 933 Part 1 Clause A.4.4 | Active
|
- Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
| ASTM C127 | Active
|
- Tests for geometrical properties of aggregates Part 7: Determination of shell content. Percentage of shells in coarse aggregates
| BS EN 933 Part 7 | Active
|
- Tests for geometrical properties of aggregates Part 3: Determination of particle shape. Flakiness index
| BS EN 933 Part 3 | Active
|
- Testing aggregates Methods for determination of particle shape. Elongation index of coarse aggregate
| BS 812 105.2 | Active
|
- Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
| ASTM C88 | Active
|
- Testing aggregates Part 111: Methods for Determination of Ten Per Cent Fines Value (TFV)
| BS 812 Part 111 | Active
|
- Testing aggregates Part 112: Method for determination of Aggregate Impact Value (AIV)
| BS 812 Part 112 | Active
|
- Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
| ASTM C131/C131M | Active
|
- Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
| ASTM C535 | Active
|
- Testing aggregates Part 110: Methods for determination of aggregate crushing value (ACV)
| BS 812 Part 110 | Active
|
- Testing aggregates Methods for determination of particle shape. Flakiness index
| BS 812 105.1 | Active
|
- Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
| ASTM D2419 | Active
|
- Testing Aggregates Part 103: Methods for Determination of Particle Size Distribution Sec 103.1: Sieve Tests
| BS 812 Part 103-1 Clause 7:2 Clause 7.3 | Active
|
| - Determination of Block Integrity/Determination of drop test breakage index
| The Rock Manual CIRIA C683 BS EN 13383-1 | Active
|
- Determination of the mass distribution of light and heavy gradings
| The Rock Manual CIRIA C683 BS EN 13383-2 Clause 6 | Active
|
- Determination of the percentage of pieces of armourstone with a length-to thickness ratio greater than 3
| The Rock Manual CIRIA C683 BS EN 13383-2 Clause 7 | Active
|
- Determination of particle density and water absorption
| The Rock Manual CIRIA C683 BS EN 13383-2 Clause 8 | Active
|
- Method for determining Point Load strength
| RTH – 325 – ISRM | Active
|
- Tests for mechanical and physical properties of aggregates Part 2: Methods for the determination of resistance to fragmentation by the Los Angeles test method
| BS EN 1097 Part 2 Clause 5 | Active
|
- Tests for thermal and weathering properties of aggregates Part 2: Magnesium sulfate test
| BS EN 1367 Part 2 | Active
|
| - Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties. Determination of particle size distribution- Wet and dry sieving method
| BS 1377 Part 2 Clause 10 | Active
|
- Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution
| BS EN 17892 Part 4 Clause 5.2 | Active
|
- Methods of test for soils for civil engineering purposes Part 9: In-situ tests (Sand replacement method suitable for fine, medium and coarse grained soils (large pouring cylinder method)
| BS 1377 Part 9 Clause 2.2 AMD 17229 July 2007 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties. Determination of the California Bearing Ratio (CBR)
| BS 1377 Part 2 Clause 15 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties. Determination of dry density/moisture content relationship using using 4.5 kg rammer for soils with particles up to medium-gravel size
| BS 1377 Part 2 Clause 11.5 &11.6 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties.
| BS 1377 Part 2 Clause 5.2 | Active
|
- Geotechnical investigation and testing. Laboratory testing of soil. Part 12: Determination of liquid and plastic limits
| BS EN 17892 Part 12+A2 Clause 5.3 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties. Determination of the plastic limit and plasticity index
| BS 1377 Part 2 Clause 6 | Active
|
- Geotechnical investigation and testing. Laboratory testing of soil Part 12: Determination of liquid and plastic limits Determination of the plastic limit and plasticity index
| BS EN 17892 Part 12+A2 Clause 5.5 & 6.5 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties (Determination of water content)
| BS 1377 Part 2 Clause 4.1 | Active
|
- Geotechnical investigation and testing Laboratory testing of soil Part 1: Determination of water content
| BS EN 17892 Part 1 +A1:2022 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties. Linear Shrinkage
| BS 1377 Part 2 Clause 7 | Active
|
| - Testing concrete Part 116: Method for determination of compressive strength of concrete cubes
| BS 1881 Part 116 AMD 6097-89 & AMD 6720-91 | Active
|
- Testing concrete; testing of hardened concrete (specimens prepared in mould)
| DIN 1048 Part 5 | Active
|
- Testing concrete Part 122: Method for determination of water absorption
| BS 1881 Part 122 | Active
|
- Testing hardened concrete Part 8: Depth of penetration of water under pressure
| BS EN 12390 Part 8 | Active
|
- Testing concrete Part 208: Recommendations for the determination of the initial surface absorption of concrete
| BS 1881 Part 208 | Active
|
- Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
| AASHTO T277 | Active
|
- Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
| ASTM C1202 | Active
|
- Testing concrete Part 114 Methods for determination of density of hardened concrete
| BS 1881 Part 114 AMD 6721 | Active
|
- Testing concrete Part 111: Method of normal curing of test specimens (20°C method)
| BS 1881 Part 111 AMD 6102 | Active
|
- Testing hardened concrete Part 1: Shape, dimensions and other requirements for specimens and molds
| BS EN 12390 Part 1 | Active
|
- Testing hardened concrete Part 2: Making and curing specimens for Strength tests
| BS EN 12390 Part 2 | Active
|
- Testing hardened concrete Part 3: Compressive Strength of test specimens
| BS EN 12390 Part 3 | Active
|
- Testing hardened concrete Part 7: Density of hardened concrete
| BS EN 12390 Part 7 | Active
|
| - Testing Concrete Part 102: Determination of Slump
| BS 1881 Part 102 | Active
|
- Testing fresh concrete - Slump test
| BS EN 12350 Part 2 | Active
|
- Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
| ASTM C1064/ C1064M | Active
|
- Testing concrete - Method for determination of density of compacted fresh concrete
| BS 1881 Part 107 | Active
|
- Testing fresh concrete - Density
| BS EN 12350 Part 6 | Active
|
- Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method -eLearning Course
| ASTM C231/C231M | Active
|
- Standard Test Method for Bleeding of Concrete
| ASTM C232 /C232M | Active
|
| - Precast concrete paving blocks - Specification for paving blocks
| BS 6717 Part 1 Annex A & B | Active
|
- Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
| ASTM C140 | Active
|
