| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Construction Materials Testing |
| | - Methods of test for Soils for civil engineering purposes Part 2: Classification tests Determination of particle size distribution- Wet sieving method & Dry Sieving Method
| BS 1377 Part 2 Clause 10 BS EN 17892 Part 4 Clause 5.2 | Active
|
- Methods of test for Soils for civil engineering purposes Part 2: Classification tests Determination of the liquid limit - Cone penetrometer method (definitive method)
| BS 1377 Part 2 Clause 5 BS EN 17892 Part 12 +A2 Clause 5.3 | Active
|
- Methods of test for Soils for civil engineering purposes Part 2: Classification tests Determination of the plastic limit and plasticity index: - Method for plastic limit - Derivation of plasticity index and liquidity index
| BS 1377 Part 2 Clause 6 BS EN 17892 Part 12 +A2 Clause 5.5 & 6.5 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests Determination of particledensity- Large pyknometer method
| BS 1377 Part 2 Clause BS EN 17892 Part 3 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests Determination of moisturecontent- Oven-drying method
| BS 1377 Part 2 Clause 4.1 BS EN 17892 Part 1 +A1 | Active
|
- Methods of test for Soils for civil engineering purposes Part 4: Compaction-related tests. Determination of dry density/moisture content relationship: - Method using 4.5 kg rammer for soils with particles up to medium- gravel size - Method using 4.5 kg rammer for soils with some coarse gravel-size particles
| BS 1377 Part 2 Clause 11.6 | Active
|
- Methods of test for Soils for civil engineering purposes Part 4: Compaction-related tests. Determination of the California Bearing Ratio (CBR)
| BS 1377 Part 2 Clause 15 | Active
|
- Methods of test for soils for civil engineering purposes Part 9: In-situ tests Sand replacement method suitable for fine, medium and coarse grained soils (large and small pouring cylinder method)
| BS 1377 Part 9 Clause 2.2 | Active
|
| - Testing concrete Part 124: Methods for analysis of hardened concrete (Determination of Chloride content in hardened concrete)
| BS 1881 Part 124 Clause 12.1 | Active
|
- Testing concrete Part 124: Methods for analysis of hardened concrete (Determination of Sulphate content in hardened concrete)
| BS 1881 Part 124 Clause 12.2 | Active
|
- Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
| ASTM C1202 | Active
|
- Chloride migration coefficient from non-steady migration experiments
| NT Build 492 | Active
|
- Testing concrete Part 124: Methods for analysis of hardened concrete (Determination of Chloride content in hardened concrete)
| BS 1881 Part 124 Clause 10.2 | Active
|
| - Testing hardened concrete Part 8: Depth of penetration of water under pressure
| BS EN ISO 12390 Part 8 | Active
|
- Testing concrete; testing of hardened concrete (specimens prepared in mould) Part 5: Determination of water permeability
| DIN 1048 Part 5 | Active
|
- Testing concrete Part 208: Recommendations for the determination of the initial surface absorption of concrete
| BS 1881 Part 208 | Active
|
- Testing concrete Part 122: Method for determination of water absorption
| BS 1881 Part 122 | Active
|
- Testing concrete Part 116: Method for determination of compressive strength of concrete cubes
| BS 1881 Part 116 AMD 6720 BS EN 12390 Part 3 | Active
|
- Testing hardened concrete Part 3: Compressive strength of test specimens
| BS EN 12390 Part 3 | Active
|
- Testing concrete Part 114: Methods for determination of density of hardened concrete
| BS 1881 Part 114 Amd 6720-91 BS EN 12390 Part 7 | Active
|
- Testing hardened concrete Part 7: Density of hardened concrete
| BS EN 12390 Part 7 | Active
|
- Testing concrete Part 111: Method of normal curing of test specimens (20°C method)
| BS 1881 Part 111 Amd 6097-89 BS EN 12390 Part 2 | Active
|
- Testing hardened concrete Part 2: Making and curing specimens for strength tests
| BS EN 12390 Part 2 | Active
|
- Testing hardened concrete Part 1: Shape, dimensions and other requirements for specimens and moulds
| BS EN 12390 Part 1 | Active
|
| - Precast concrete masonry units Part 1: Specification for precast concrete masonry units- Measurement of dimension
| BS 6073 Part 1 Appendix A Amd. 4508-1984 | Active
|
- Precast concrete masonry units Part 2: Method for specifying precast concrete masonry units- Routine rapid control test of compressive strength
| BS 6073 Part 2 Appendix B Amd. 4462-1984 | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks- Measurement of dimension and plan area
| BS 6717 Part 1 Annex A | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks- Determination of compressive strength
| BS 6717 Part 1 Annex B | Active
|
| - Bend Tests Specification for Carbon steel bars for the reinforcement of concrete
| BS 4449 Appendix C Clause C.1.6.1 | Active
|
- Carbon steel Bars for reinforcement of concrete- Tensile Test Tensile testing of metallic materials Method of test at ambient temperature
| BS 4449 Annex E Clause E.1.4 & BS EN 10002 Part 1 | Active
|
- Carbon steel Bars for reinforcement of Concrete- Re bend test
| BS 4449 Annex E Clause E.1.6 | Active
|
- Steel for the reinforcement of concrete Weldable reinforcing steel Bar, coil and decoiled product Specification- Tensile test Steel for the reinforcement and prestressing of concrete. Test methods. Reinforcing bars, wire rod and wire
| BS 4449: 2005 + A3 BS EN ISO 15630 Part 1 Clause 5 | Active
|
- Steel for the reinforcement of concrete Weldable reinforcing steel Bar, coil and decoiled product Specification- Rebend test Steel for the reinforcement and prestressing of concrete. Test methods. Reinforcing bars, wire rod and wire
| BS 4449: 2005 + A3 BS EN ISO 15630 Part 1 Clause 7 | Active
|
| - Testing aggregates Part 110: Method for determination of Aggregate Crushing Value (ACV)
| BS 812 Part 110 | Active
|
- Testing aggregates Part 105: Method for determination of particle shape. Flakiness Index
| BS 812 Part 105 Section 105.1 BS EN 933 Part 3 | Active
|
- Standard Test Method for Materials Finer than 75µm (No. 200) Sieve in Mineral Aggregates by Washing
| ASTM C117 | Active
|
- Standard Test Method for Density, Relative Density (Specific Gravity) & Absorption of Fine Aggregates
| ASTM C128 | Active
|
- Testing aggregates. Part 2: Methods for determination of density
| BS 812 Part 2 Test 5.3, 5.4 & 5.5 (Amd. 10379/99) | Active
|
- Standard Test Method for Clay Lumps and Friable Particles in Aggregates
| ASTM C 142/C142M | Active
|
- Standard Test Method for Sand equivalent value of soils and fine aggregate
| ASTM D2419 | Active
|
- Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
| ASTM C 136/C136M | Active
|
- Standard Test Method for Density, Relative Density (Specific Gravity) and Absorption of Coarse Aggregates
| ASTM C127 | Active
|
- Testing aggregates. Method for determination of particle shape. Elongation Index of coarse aggregates
| BS 812 Part 105 Section 105.2 | Active
|
- Testing aggregates Part 103: Method for determination of particle size distribution. Sieve tests
| BS 812 Part 103, Section 103.1 Clause 7.2 & 7.3 (Amd. 6003/89) BS EN 993 Part 1 | Active
|
- Testing Aggregates Part 111: Methods for determination of Ten Percent Fines Value (TFV)
| BS 812 Part 111 Test 7.1 & 7.2 | Active
|
- Testing aggregates Part 112: Method for determination of Aggregate Impact Value (AIV)
| BS 812 Part 112 (Amd. 8772/95) | Active
|
| - Flexible sheets for waterproofing. Determination of tensile properties Part 1: Bitumen sheets for roof waterproofing
| EN 12311 Part 1 | Active
|
- Determination of Tear Strength
| ASTM D5147/D5147M ASTM D4073 | Active
|
- Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank) Part 1: Bitumen sheets for roof waterproofing
| EN 12310 Part 1 | Active
|
- Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Part 1: Bitumen sheets for roof waterproofing
| EN 1849 Part 1 | Active
|
- Determination of water absorption of Plastics
| ASTM D570 | Active
|
- Determination of Puncture resistance
| ASTM E154/E154M | Active
|
- Determination of resistance to tearing
| UEATC MOAT No.27 | Active
|
| - Determination of Index puncture resistance of geomembranes & related products
| ASTM D4833/D4833M | Active
|
- Determination of Grab breaking load & Elongation
| ASTM D 4632/D4632M | Active
|
- Determination of Trapezoid tearing strength of geotextiles
| ASTM D 4533/D4533 M | Active
|
| - Methods of testing plastics. Mechanical properties. Tensile strength, elongation and elastic modulus
| BS 2782 Part 3 Method 320 C | Active
|
| - Standard Test Methods for Deep Foundations Under Static Axial Compressive Load Static load test on instrumented piles (compression, tension, bidirectional) Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
| ASTM D1143/D1143M, and ASTM D8169/D8169M | Active
|
- Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
| ASTM D6760 | Active
|
- Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
| ASTM D6167 | Active
|
- Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
| ASTM D4945 | Active
|
- Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
| ASTM D5882 | Active
|
| | - Methods of test for soils for civil engineering purposes Part 3: Chemical and electro- chemical tests Determination of pH value
| BS 1377 Part 3 Clause 12.5 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of the chloride content
| BS 1377 Part 3 Clause 9.3 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests (Determination of the sulphate content of soil and ground water)
| BS 1377 Part 3 Clause 7.8 | Active
|
| - Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests (Determination of pH value)
| BS 1377 Part 3 Clause 12 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of acid-soluble chloride content
| BS 1377 Part 3 Clause 9.3.3.3 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests (Determination of the sulphate content of soil and ground water Acid soluble Sulphate content of soil)
| BS 1377 Part 3 Clause 7.6.4 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of water- soluble chloride content
| BS 1377 Part 3 Clause 9.2.8.2 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of the sulphate content of soil and ground water Water soluble sulphate content of soil
| BS 1377 Part 3 Clause 7.6 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of carbonate content
| BS 1377 Part 3 Clause 8.3 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of organic matter content
| BS 1377 Part 3 Clause 4 | Active
|
| - Testing aggregates Part 117: Method for determination of water-soluble chloride salts Test method for determination of chloride content of aggregate using nitric acid extract, for aggregate containing chloride not extracted by water
| BS 812 Part 117 Appendix C | Active
|
- Testing aggregates Part 118: Method for determination of Sulphate content Determination of sulphate content of acid extraction
| BS 812 Part 118 Clause 6 | Active
|
- Testing aggregates Part 118: Method for determination of Sulphate content Determination of sulphate content of a 2 : 1 water/aggregate extract
| BS 812 Part 118 Clause 5 | Active
|
- Testing aggregates Part 117: Method for determination of water-soluble chloride salts
| BS 812 Part 117 Clause 9 | Active
|
| - Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Optical Emission spectrometer PDA-7000 for C, S, P, N, Mn, Si, Cr, Mo, V, Ni, Cu+(CEV)
| OES / MS-008 / ASTM E 415 | Active
|
| GI |
| | - Code of practice for site investigations – Ground water level measurement
| BS 5930 +A1 Clause 52.0 BS 5930 Clause 23.2, 27.5, 47.2.7 | Active
|
- Code of practice for site investigations – Ground water samples
| BS 5930 +A1 Clause 26.4 BS 5930 Clause 23.3 | Active
|
| - Code of practice for site investigations – Sample quality
| BS 5930 +A1 Clause 24.9, 24.11 and 25 BS 5930 Clause 22 | Active
|
- Code of practice for site investigations – Standard penetration test
| BS 5930 Clause 25.2 with x-ref of BS 1377 Part 9 Section 3.3 AMD 17229:2007 BS EN ISO 22476 Part 3 + A1 | Active
|
- Code of practice for site investigations – Soil description
| BS 5930 Clause 41 & Clark and Walker BS 5930+A1 section 6.0 Clause 33 & Clark and Walker | Active
|
- Geotechnical investigation and testing. Geohydraulic testing. Water permeability tests in a borehole using open systems- Falling Head Method
| ACES – MS-027 as per BS EN ISO 22282 Part 2 BS 5930 Clause 25.4 | Active
|
| - Code of practice for site investigations – Rock quality designation
| BS 5930 +A1 Section 6 Clause 36.4.4 BS 5930 Clause 44.4.4 | Active
|
- Code of practice for site investigations – Core recovery
| BS 5930 +A1 Section 6 Clause 36.4.4 BS 5930 Clause 44.4.4 | Active
|
- Code of practice for site investigations – Description of rock cores
| BS 5930 Clause 44 Clark & Walker BS 5930 +A1 Section 6 Clause 36 & Clark & Walker | Active
|
- Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures Unconfined Compression Test
| ASTM D7012-14E1 | Active
|
- Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances Unconfined Compression Test
| ASTM D4543 | Active
|
- Standard Test Methods for Laboratory Determination of the Point Load Strength Index of Rock
| ASTM D5731 | Active
|
- Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
| ASTM D2216 | Active
|
| - Code of practice for site investigations – Rotary core drilling
| BS 5930 +A1 Clause 24.11 BS 5930 Clause 20.7.3 | Active
|
- Standard Test Method for Prebored Pressuremeter Testing in Soils- high Pressure meter (OYO Elastmeter-2)
| ASCES – MS-005 ASTM D4719 | Active
|
- Standard Test Methods for Prebored Pressuremeter Testing in Soils
| ASTM D4719 ACES – MS-005 ACES – MS-006 | Active
|
- Geotechnical investigation and testing. Field testing, Electrical cone and piezocone penetration test (CPTU)
| BS EN ISO 22476 Part 1 BS 1377 Part 9 AMD 17229 - 2007 Clause 3.1 | Active
|
- Geotechnical investigation and testing. Geohydraulic testing, Water pressure tests in rocks- Packer Method
| ACES - MS-017 BS 5930: Clause 25.5 BS EN ISO 22282 Part 3 | Active
|
- Code of practice for site investigations- Piezometer Installation
| ACES- MS-016 as per BS 5930+A1 Clause 52.0 | Active
|
| - Code of Practice for Site Investigations Section 10. Reports and interpretation
| BS 5930+A1 Section 7 and Section 10, Eurocode 7 BS EN 1997-1+A1, NA+A1 to BS EN 1997-1+A1, UK National Annex to Eurocode 7 | Active
|
| Environmental |
- Chemical and Environmental
| | | APHA-AWWA-WEF 23rd Edition 4500 H+B | Active
|
| APHA-AWWA-WEF 23rd Edition 2510 B | Active
|
| APHA-AWWA-WEF 23rd Edition 2540 C | Active
|
| BS 1377 Part 3 Clause 11 | Active
|
| APHA-AWWA-WEF 23rd Edition 2540 D | Active
|
- Determination of Metals: Aluminium (Al), Antimony (Sb), Arsenic (As), Barium (Ba), Beryllium (Be), Boron (B), Cadmium (Cd), Calcium (Ca), Chromium (Cr), Cobalt (Co), Copper (Cu), Iron (Fe),
| APHA-AWWA-WEF 23rd Edition 3120 B | Active
|
- Determination of Metals: Lead (Pb), Lithium (Li), Magnesium (Mg), Manganese (Mn), Molybdenum (Mo), Nickel (Ni), Potassium (K), Selenium (Se), Silver (Ag), Sodium (Na), Strontium (Sr), Vanadium (V), Zinc (Zn)
| APHA-AWWA-WEF 23rd Edition 3120 B | Active
|
| APHA-AWWA-WEF 23rd Edition 5210B | Active
|
| APHA-AWWA-WEF 23rd Edition 5220B | Active
|
- Carbonates & Bicarbonate, Total Alkalinity / Acidity
| ASTM D1067 | Active
|
| - Determination of Metals: Aluminum (Al), Antimony (Sb) , Arsenic (As), Barium (Ba), Beryllium (Be), Boron (B), Cadmium (Cd), Calcium (Ca), Chromium (Cr), Cobalt (Co), Copper (Cu),
| USEPA 3051A | Active
|
- Determination of Metals: Iron (Fe), Lead (Pb), Magnesium (Mg), Manganese (Mn), Molybdenum (Mo), Nickel (Ni), Potassium (K), Selenium (Se), Silver (Ag), Sodium (Na), Strontium (Sr), Vanadium (V), Zinc (Zn)
| USEPA 3051A | Active
|
| - Determination of Metal: Iron (Fe), Copper (Cu), Zinc (Zn), Calcium (Ca), Magnesium (Mg), Sodium (Na), Potassium (K), Phosphorus (P), Manganese (Mn), Arsenic (As), Cadmium (Cd), Lead (Pb), Mercury (Hg), Barium (Ba)
| AOAC Official Method 2011.14 / FDA EAM for Food Related Products | Active
|
| Green Blnd |
| | - Steady State Thermal transmission properties by Heat flow meter
| ASTM C518 | Active
|
| - Glass in Building-Determination of luminous & Solar characteristics of Glazing-Shading Coefficient
| BS EN 410 Clause 5.7 | Active
|
- Glass in Building-Determination of luminous & Solar characteristics of Glazing-Determination of light properties-Light Transmittance
| BS EN 410 Clause 5.2 | Active
|
- Glass in Building-Determination of Thermal Transmittance (U) value-Calculation Method
| BS EN 673 | Active
|
- Glass in Building-Determination of luminous & Solar characteristics of Glazing- Total Solar energy transmittance & shading coefficient. Determination of solar direct transmittance. Determination of solar direct Reflectance. Determination of solar direct Absorbance
| BS EN 410 Clause 5.4 | Active
|
- Glass in Building-Determination of luminous & Solar characteristics of Glazing- Determination of Light properties-Light reflectance
| BS EN 410 Clause 5.3 | Active
|
| - Determination of Solar Reflective Index (SRI)
| ASTM E1980 ASTM E903 ASTM C1371 | Active
|
