| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Petroleum & Petrochemical |
| | - Determination of Flash and Fire Points by Cleveland Open Cup Tester
| ASTM D92 | Active
|
- Determination of Kinematic Viscosity of Transparent and Opaque Liquids(and Calculation of Dynamic Viscosity)
| ASTM D445 | Active
|
- Determination of Acid Number of Petroleum Products by Potentiometric Titration
| ASTM D664 | Active
|
- Determination of Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
| ASTM D2896 | Active
|
- Determination of Low-Temperature Viscosity of Lubricants Measured by rotational Viscometer
| ASTM D2983 | Active
|
- Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
| ASTM D5185 | Active
|
- Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
| ASTM D4684 (A) | Active
|
- Determination of Apparent Viscosity of Engine Oils and Base Stocks Between –5 °Ϲ and –35 °C Using Cold-Cranking Simulator
| ASTM D5293 | Active
|
- Determination of Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
| ASTM D4052 | Active
|
- Determination of ASTM Color of Petroleum Products (ASTM Color Scale)
| ASTM D1500 | Active
|
- Corrosiveness to Copper from Petroleum Product by Copper Strip Test
| ASTM D130-12 | Active
|
- Water Separability of Petroleum Oils and Synthetic Fluids
| ASTM D1401-12 | Active
|
- Ash from Petroleum Products, Range : 0.001 to 0.180 mass %
| ASTM D 482 | Active
|
- Sulfated Ash from lubricating oils and additives.
| ASTM D 874 | Active
|
- Determination of Viscosity at High Temperature and High Shear Rate by Tapered Plug Viscometer
| ASTM D 4741 | Active
|
- Evaporation Loss of Lubricating Oils by Noack Method.Range – Test Temperature 250±0.5 °C for 60 minutes, Pressure Differential 20 ± 0.20 mm
| ASTM D 5800 | Active
|
- Determination of Water in Petroleum Products, Lubricating Oils, Additives by Coulometric Karl Fischer titration Range 10 – 25000 mg/kg
| ASTM D 6304 | Active
|
- Pour Point Range-95 °C to +45 °C Samples with no flow point temperature from -77 °C to +2 °C
| ASTM D 7346 | Active
|
- Transformer oil, Break fluid, Coolant
| - Determination of pH in range 4.0-12.0
| ASTM D1287 | Active
|
- Low Temperature Kinematic Viscosity Range : +15 °C to -70 °C
| ASTM D445 | Active
|
| - Determination of Boiling Point of Engine Coolants
| ASTM D 1120 | Active
|
