| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| CM |
| - Concrete & Concrete Blocks
| - Testing Concrete Part 124: Method for analysis of hardened cocnrete. Determination of sulfate content.
| BS 1881 Part 124 Clause 12.2 ADD-06(2002) | Active
|
- Testing concrete Part 124: Methods for analysis of hardened concrete Clause 12: Determination of chloride content
| BS 1881 Part 124 Clause 12 | Active
|
| - Electrical indication of concrete's ability to resist chloride ion penetration
| ASTM C1202 | Active
|
| - Surface Active Agents – Determination of pH of Aqueous Solutions – Potentiometric Method
| GSO ISO 4316 | Active
|
- Standard Specification for Chemical Admixture for Concrete. Specific Gravity (Liquid Admixtures)
| ASTM C494/C494M Clause 18.4 | Active
|
| - Specification for Solid Glass Beads for use with road marking compounds and for other industrial uses. Appendix B Test to determine particle size distribution
| BS 6088 Appendix B AMD 5600 : 1987 | Active
|
| - Methods of tests for Soils for civil engineering purposes Part 3: Chemical and electro-chemical tests. Determination of chloride content (Ground water).
| BS 1377 Part 3 Clause 9.2 | Active
|
- Methods of tests for Soils for civil engineering purposes Part 3: Chemical and electro-chemical tests. Caluse 7.8: Determination of groundwater sulfate (GWS)
| BS 1377 Part 3 Clause 7.8 | Active
|
- Methods of tests for Soils for civil engineering purposes Part 3: Chemical and electro-chemical tests. Determination of the pH value (Ground Water)
| BS 1377 Part 3 Clause 12 | Active
|
- Standard Test Methods for Chloride Ion In Water
| ASTM D512 | Active
|
- Standard Test Methods for pH of Water
| ASTM D1293 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Clause 11: Determination of total dissolved solids
| BS 1377 Part 3 Clause 11 | Active
|
- Standard Test Method for Sulfate Ion in Water
| ASTM D516 | Active
|
- Determination of Total and Dissolved Carbon Dioxide in Water
| ASTM D513 Method A | Active
|
| - Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Clause 4: Determination of the organic matter content
| BS 1377 Part 3 Clause 4 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Clause 8.3: Rapid titration method for determination of calcium carbonate content
| BS 1377 Part 3 Clause 8.3 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Clause 7.9: Determination of acid-soluble sulfate (AS)
| BS 1377 Part 3 Clause 7.9 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Clause 9.3: Determination of acid-soluble chloride content
| BS 1377 Part 3 Clause 9.3 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests; Clause 9.2: Determination of water-soluble chloride content
| BS 1377 Part 3 Clause 9.2 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Clause 7.8: Determination of Groundwater sulfate GWS
| BS 1377 Part 3 Clause 7.8 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests; Clause 12: Determination of the pH value
| BS 1377 Part 3 Clause 12 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Clause 7.3: Determination of water-soluble sulfate in soil (WS)
| BS 1377 Part 3 Clause 7.3 | Active
|
| - Method of testing cement Part 2: Chemical analysis of cement; Cement - Test Methods
| BS EN 196 Part 2 | Active
|
- Cement - Test methods Part 2: Chemical analysis by X-ray fluorescence
| BS ISO 29581 Part 2 | Active
|
- Methods of testing cement Part 2: Chemical analysis of cement Clause 4.5.16: Determination of chloride
| BS EN 196 Part 2 Clause 4.5.16 | Active
|
| - Testing aggregates Part 117: Method for determination of water-soluble chloride salts Appendix C: Test method for determination of chloride content of aggregates using a nitric acid extract, for aggregate containing chloride not extracted water
| BS 812-117 Appendix C | Active
|
- Tests for chemical properties of aggregates Part 1: Chemical analysis Clause 12: Determination of acid soluble sulfates
| BS EN 1744 Part 1 Clause 12 | Active
|
- Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
| ASTM C40/C40M | Active
|
| - Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry; Elements: C, S, P, N, Mn, Cr, Mo, V, Ni, Al, Cu, Si
| ASTM E415 | Active
|
| - Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry; Elements: C, Si, Mn, P, S, Cr, Mo, Ni, Cu
| ASTM E1086 | Active
|
| | - Standard Test Method for Measuring Mass per Unit Area of Geotextiles
| ASTM D5261 | Active
|
- Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing Clause 5.1: Surface Condition
| DIN 8078 Clause 5.1 | Active
|
- Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing Clause 5.2: Dimensions
| DIN 8078 Clause 5.2 | Active
|
- Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing Clause 5.3: Out-of-roundness (ovality)
| DIN 8078 Part 9 Clause 5.3 | Active
|
- Thermoplastics pipes – Longitudinal reversion – Test method and parameters
| BS EN ISO 2505 Part 5 | Active
|
| - Grouts for tiles Part 5: Determination of water absorption.
| BS EN 12808 Part 5 | Active
|
- Grouts for tiles Part 3: Determination of flexural and compressive strength
| BS EN 12808 Part 3 | Active
|
- Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
| BS EN 15771 | Active
|
| | - Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalt by Hydrometer Method
| ASTM D3142/D3142M | Active
|
- Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
| ASTM D92 | Active
|
- Standard Practice for Identifying Cationic Emulsified Asphalts.
| ASTM D7402 | Active
|
- Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts.
| ASTM D6930 | Active
|
- Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
| ASTM D36/D36M | Active
|
| - Flexible sheets for water proofing - Determination of thickness and mass per unit area Part 1: Bitumen sheets for roof water proofing. Determination of thickness.
| BS EN 1849 Part 1 Clause 4 | Active
|
- Flexible sheets for water proofing - Determination of resistance to tearing (nail shank) Part 1: Bitumen sheets for roof water proofing.
| BS EN 12310 Part 1 | Active
|
- Standard Test Method for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs , on Walls, or as Ground Cover. Resistance to Puncture.
| ASTM E154/E154M Clause 10 | Active
|
- Flexible sheets for water proofing - Determination of thickness and mass per unit area Part 1: Bitumen sheets for roof water proofing. Determination of mass per unit area.
| BS EN 1849 Part 1 Clause 5 | Active
|
| - Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
| ASTM D6307 | Active
|
- Standard Test Method for Penetration of Bituminous Materials
| ASTM D5/D5M | Active
|
- Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
| ASTM D70 | Active
|
- Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
| ASTM D6927 | Active
|
- Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
| ASTM D2726 | Active
|
- Computation of voids in compacted bituminous paving mixture
| DMS 009 | Active
|
- Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
| ASTM D3549/D3549M | Active
|
- Standard Test Method for Ductility of Bituminous Materials
| ASTM D113 | Active
|
- Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
| ASTM D2042 | Active
|
- Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
| ASTM D3143/D3143M | Active
|
- Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
| ASTM D95 | Active
|
- Standard Test Method for Distillation of Cutback Asphalt
| ASTM D402/D402M | Active
|
- Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
| ASTM D2170/2170M | Active
|
- Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
| ASTM D4402/D4402M | Active
|
- Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
| ASTM D7405 | Active
|
- Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
| ASTM D6084/D6084M | Active
|
- Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
| ASTM D2872 | Active
|
- Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
| ASTM D6521 | Active
|
- Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
| ASTM D7175 | Active
|
- Asphalt Mix Preparation in the Laboratory
| DMS 005 | Active
|
- Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
| ASTM D6926 | Active
|
| - Standard Test Method for Bulk Density (Unit Weight) & Voids in Aggregate (Jigging)
| ASTM C29/C29M Clause 9.2.2 | Active
|
- Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution. Sieving method
| BS EN 933 Part 1 | Active
|
- Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
| ASTM C136/C136M | Active
|
- Testing aggregates Part 110: Methods for determination of aggregate crushing value (ACV)
| BS 812 Part 110 (AD-03:2002) | Active
|
- Standard Test Method for Materials Finer than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
| ASTM C117 | Active
|
- Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
| ASTM C127 | Active
|
- Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
| ASTM C88 | Active
|
- Standard Test Method for Sand equivalent value of soils and fine aggregate
| ASTM D2419 | Active
|
- Testing aggregates Part 105: Methods for determination of particle shape Section 105.1: Flakiness index
| BS 812 Part 105 Section 105.1 | Active
|
- Testing aggregates Part 105: Methods for determination of particle shape Section 105.2: Elongation index of coarse aggregate
| BS 812 Part 105 Section 105.2 | Active
|
- Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
| ASTM C128 | Active
|
- Standard test method for Resistance to degradation of small –size coarse aggregate by abrasion and impact in the los Angeles machine
| ASTM C131/C131M | Active
|
- Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
| ASTM C535 | Active
|
- Standard Test Method for Clay Lumps and Friable Particles in Aggregates
| ASTM C142/C142M | Active
|
- Tests for geometrical properties of aggregates Part 7: Determination of shell content. Percentage of shells in coarse aggregates
| BS EN 933 Part 7 | Active
|
- Determination of percentage of fully crushed particles in coarse aggregate
| DMS 007: 2001 | Active
|
- Determination of percentage of partially crushed particles in coarse aggregate
| DMS 008: 2001 | Active
|
- Testing aggregates Part 2: Methods for determination of density Test 5: Determination of particle densities and water absorption- Method for determination of particle density of filler
| BS 812 Part 2 Clause 5.7 AMD 10397 : 1999 | Active
|
- Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
| ASTM D546 | Active
|
- Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate Clause 9.2.1 - Rodding Procedure Clause 9.2.3 - Shoveling Procedure
| ASTM C29/C29M Clause 9.2.1 Clause 9.2.3 | Active
|
- British Standard Code of practice for Building drainage. Compaction fraction test for suitability of bedding material.
| BS 8301 APP. D | Active
|
- Standard Test Method for Lightweight Particles in Aggregate Lightweight particles in fine aggregate
| ASTM C123/C123M Clause 8.1 | Active
|
- Standard Test Method for Lightweight Particles in Aggregate Lightweight particles in coarse aggregate
| ASTM C123/C123M Clause 8.2 | Active
|
| - Method of test for Soils for civil engineering purposes Part 2: Classification tests. Cone penetrometrer method (definitive method).
| BS 1377 Part 2 Clause 4.3 | Active
|
- Methods of test for soils for civil engineering purposes Part 4: Compaction-related tests Clause 3.6: Determination of dry density/moisture content relationship- Method using 4.5 kg rammer for soils with some coarse gravel-size particles
| BS 1377 Part 4 Clause 3.6 AMD 8259: 1995 AMD 13925: 2002 | Active
|
- Methods of test for soils for civil engineering purposes Part 9: In-situ tests Clause 2.2: Sand replacement method suitable for fine, medium and coarse grained soils (large pouring cylinder method)
| BS 1377 Part 9 Clause 2.2 AMD 8264 : 95 (AD-09 : 2011) | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests Clause 9.2: Determination of particle size distribution- Wet sieving method. Wet & Dry sieving methods
| BS 1377 Part 2 Clause 9.2 & 9.3 AMD 9027 : 1996 | Active
|
- Methods of test for soils for civil engineering purposes Part 4: Compaction-related tests Clause 3.5: Determination of dry density/moisture content relationship- Method using 4.5 kg rammer for soils with particles up to medium-gravel size
| BS 1377 Part 4 Clause 3.5 AMD 8259 : 1995 AMD 13925 : 2002 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests Clause 4.5: Determination of the liquid limit -Casagrande apparatus method
| BS 1377 Part 2 Clause 4.5 AMD 9027 : 1996 | Active
|
- Methods of test for soils for civil engineering purposes Part 4: Compaction-related tests Clause 3.6: Determination of dry density/moisture content relationship- Method using 4.5 kg rammer for soils with some coarse gravel-size particles
| BS 1377 Part 4 Clause 3.6 AMD 8259 : 1995 AMD 13925 : 2002 | Active
|
- Methods of test for soils for civil engineering purposes Part 4: Compaction-related tests Clause 3.7: Determination of dry density/moisture content relationship- Method using vibrating hammer
| BS 1377 Part 4 Clause 3.7 AMD 8259 : 1995 AMD 13925 : 2002 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests. Clause: 6.5 Determination of shrinkage characteristics- Linear Shrinkage
| BS 1377 Part 2 Clause 6.5 AMD 9027 : 1996 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests. Clause 5.3: Determination of the plastic limit and plasticity index - Method for plastic limit
| BS 1377 Part 2 Clause 5.3 AMD 9027 : 1996 | Active
|
- Methods of test for soils for civil engineering purposes-Part 2: Classification tests. Clause 5.4: Determination of the plastic limit and plasticity index - Derivation of plasticity index and liquidity index
| BS 1377-2 : 1990 cl. 5.4 AMD 9027 : 1996 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests Clause 3.2: Determination of moisture content- Oven-drying method
| BS 1377 Part 2 Clause 3.2 AMD 9027 : 1996 | Active
|
| - Standard Specification for Silica Fume Used in Cementitious Mixtures. Density
| ASTM C1240 Clause 12 | Active
|
- Standard Tes Method for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland -Cement Concrete. Moisture Content
| ASTM C311 Clause 11 & ASTM C1240 Clause 11 | Active
|
| - Testing hardened concrete Part 8: Depth of penetration of water under pressure
| BS EN 12390 Part 8 | Active
|
- Testing concrete Part 122: Method for determination of water absorption
| BS 1881 Part 122 | Active
|
- Testing hardened concrete Part 3: Compressive strength of test specimens Part 7: Density of hardened concrete
| BS EN 12390 Part 3 and BS EN 12390 Part 7 | Active
|
- Testing concrete Part 111: Method of normal curing of test specimens (20°C method) Part 114: Method for determination of density of hardened concrete Part 116: Method for determination of compressive of concrete cubes
| BS 1881: Part 111 Part 114 and Part 116 | Active
|
- Testing hardened concrete Part 1: Shape, dimensions and other requirements for specimens and moulds
| BS EN 12390 Part 1 | Active
|
- Precast concrete masonry units Part 2: Method for specifying precast concrete masonry units App. B: Routine rapid control test of compressive strength of blocks by manufacturer (fibre board test) Compressive strength of masonry blocks
| BS 6073 Part 2 App. B AMD 4508 | Active
|
- Precast concrete masonry units Part 1: Specification for precast concrete masonry units Appendix A : Measurement of dimensions
| BS 6073 Part 1 APP. A AMD 4462 | Active
|
- Precast concrete masonry units Part 2: Method for specifying precast concrete masonry units App. C: Determination of block density, concrete density and net area of hollow blocks; Density of Filler Blocks
| BS 6073 Part 2 App. C AMD 4508 | Active
|
- Testing hardened concrete Part 2: Making and curing specimens for strength tests
| BS EN 12390 Part 2 | Active
|
- Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units Clause 8: Absorption Annex A4.4: Absorption Testing ; Water absorption of blocks
| ASTM C140 Clause 8 Annex A4 | Active
|
- DMS 1: Specification of precast concrete blocks Part 4: Paving blocks Annex A: Measurement of dimensions and plan area; Annex B : Determination of Compressive strength
| DMS 1 Part 4 Annex A & B | Active
|
| - Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
| ASTM D2041/D2041M | Active
|
- Determination of loss of stability of compacted bituminous mixtures using Marshall Apparatus
| DMS 010: 2001 | Active
|
- Computation of voids in compacted bituminous paving mixture & Determination of loss of stability of compacted bituminous mixtures using Marshall Apparatus
| DMS 009: 2001 and DMS 010: 2001 | Active
|
- Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
| ASTM D6931 | Active
|
- Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
| ASTM D6648 | Active
|
- Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures.
| ASTM D4867/D4867M | Active
|
| - Standard Test Methods and Definitions for Mechanical Testing of Steel Products Tensile Test Clause: 6 to 14 and Annex A1
| ASTM A370 Clause: 6 to 14 Annex A1 | Active
|
- Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method
| BS EN ISO 2178 | Active
|
| - Methods of testing cement Part 3: Determination of setting times and soundness Clause 5: Standard consistence test; Consistency of cement
| BS EN 196 Part 3 Clause 5 | Active
|
- Methods of testing cement Part 3: Determination of setting times and soundness Clause 6: Setting time test; Setting time of cement
| BS EN 196 Part 3 Clause 6 | Active
|
- Methods of testing cement Part 6: Determination of fineness
| BS EN 196 Part 6 | Active
|
- Methods of testing cement Part 6: Determination of fineness National Annex NC (informative): Method of testing cement for density
| BS EN 196 Part 6 National Annex | Active
|
- Methods of testing cement Part 6: Determination of fineness Clause 4.5.3: Determination of density
| BS EN 196 Part 6 Clause 4.5.3 | Active
|
- Methods of testing cement Part 1: Determination of strength Clause 9.2: Compressive strength
| BS EN 196 Part 1 Clause 9.2 | Active
|
- Methods of testing cement Part 1: Determination of strength Clause 9.1: Flexural strength
| BS EN 196 Part 1 Clause 9.1 | Active
|
- Methods of testing cement Part 3: Determination of setting times and soundness Clause 7: Soundness test
| BS EN 196 Part 3 Clause 7 | Active
|
| - Standard Test Method for Grab Breaking Load and Elongation of Geo textiles
| ASTM D4632 | Active
|
| - Concrete paving blocks Requirements and test methods Measurement of abrasion resistance (wide wheel test)
| BS EN 1338 | Active
|
- Ceramic tiles Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density- boiling method
| BS EN ISO 10545 Part 3 | Active
|
- Ceramic tiles Part 4: Determination of modulus of rupture and breaking strength
| BS EN ISO 10545 Part 4 | Active
|
| - Standard Test Methods for Testing Multi-Wire Steel Strand
| ASTM A1061/A1061M | Active
|
- Tensile Strength High tensile steel wire and strand for the prestressing of concrete. Specification
| BS 5896 | Active
|
| - Standard Test Methods and Definitions for Mechanical Testing of Steel Products Annex A9: Methods for testing steel reinforcing bars; Tensile test of carbon steel bar for concrete
| ASTM A370 Annex A9 | Active
|
- Steel for the reinforcement and pre-stressing of concrete. Test methods. Reinforcing bars, wire rod and wire Part 1 : Reinforcing bars, wire rod and wire Clause 10: Measurement of the geometrical characteristics; Clause 11 Determination of the relative rib or indentation area
| BS EN ISO 15630 Part 1 Clause 10 & Clause 11 | Active
|
- Specification for Carbon steel Bars for reinforcement of Concrete Clause 9.2: Bond classification by surface shape; Measurement of projected rib area
| BS 4449 : 1997 Clause 9.2 | Active
|
- Standard Specification for Deformed and Plain Carbon - Steel Bars for Concrete Reinforcement - Clause 7 Requirements for Deformations Clause 8: Measurement of Deformations Rib geometry
| ASTM A615/A615M Clause 7 & Clause 8 | Active
|
| - Methods of test for masonry units Part 16: Determination of dimensions
| BS EN 772 Part 16 | Active
|
- Methods of test for masonry units Part 1: Determination of compressive strength
| BS EN 772 Part 1 | Active
|
- Methods of test for masonry units Part:13: Determination of net and gross dry density of masonry units (except for natural stone) Clause 7.3: Gross dry density
| BS EN 772 Part 13 Clause: 7.3 | Active
|
- Methods of test for masonry units Part 13: Determination of net and gross dry density of masonry units (except for natural stone) Clause 7.2: Net dry density
| BS EN 772 Part 13 Clause: 7.2 | Active
|
- Aggregate/ Bituminous Material
| - Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
| ASTM D5444 | Active
|
| - Testing hardened concrete Part 5: Flexural strength of test specimens
| BS EN 12390 Part 5 | Active
|
- Testing concrete Part 208: Recommendations for the determination of the initial surface absorption of concrete
| BS 1881 Part 208 | Active
|
| - Testing concrete in structures Part 1: Cored specimens. Taking, examining and testing in compression
| BS EN 12504 Part 1 | Active
|
- Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
| ASTM C496/C496M | Active
|
| - Testing concrete Part 125: Methods for mixing and sampling fresh concrete in the laboratory
| BS 1881 Part 125 | Active
|
- Testing fresh concrete Part 7: Air content. Pressure methods
| BS EN 12350 Part 7 | Active
|
- Standard Test Method for Bleeding of Concrete
| ASTM C232/C232M | Active
|
- Testing fresh concrete Part 1: Sampling
| BS EN 12350 Part 1 | Active
|
- Testing fresh concrete Part 2: Slump test
| BS EN 12350 Part 2 | Active
|
- Testing concrete Part 110: Method for making test cylinders from fresh concrete
| BS 1881 Part 110 | Active
|
- Testing concrete Part 108: Method for making test cubes from fresh concrete
| BS 1881 Part 108 | Active
|
- Concrete products (paving blocks)
| - Precast concrete paving blocks Part 1: Specification for paving blocks DMS 1: Specification for precast concrete blocks Part 4: Paving blocks Annex A.1.2.2: Determination of thickness, length & width - Non Rectangular blocks
| BS 6717 Part 1 and DMS 001 Part 4 Annex A.1.2.2 | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks DMS 1: Specification for precast concrete blocks Part 4: Paving blocks Annex A.2.2: Determination of plan area- Non-Rectangular paving blocks Annex B – Determination of Compressive strength
| BS 6717 Part 1 and DMS 001 Part 4 Annex A.2.2 & Annex B | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks DMS 1: Specification for precast concrete blocks Part 4: Paving blocks Annex A.1.2.1: Determination of thickness, length & width - Rectangular blocks
| BS 6717 Part 1 and DMS 001 Part 4 Annex A.1.2.1 | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks DMS 1: Specification for precast concrete blocks Part 4: Paving blocks Annex A.2.1: Determination of plan area- Rectangular paving blocks Annex B: Determination of Compressive strength
| BS 6717 Part 1 and DMS 001 Part 4 Annex A.2.1 & Annex B | Active
|
- DMS 1: Specification for precast concrete blocks Part 4: Paving blocks Annex C: Water absorption
| DMS 001 Part 4 Annex C | Active
|
| - Ceramic tiles. Grouts and adhesives Part 2: Test methods for adhesives Clause 4.1: Determination of open time
| BS ISO 13007 Part 2 Clause 4.1 | Active
|
- Ceramic tiles. Grouts and adhesives Part 2: Test methods for adhesives Clause 4.2: Determination of slip
| BS ISO 13007 Part 2 Clause 4.2 | Active
|
- Adhesives for tiles Determination of tensile adhesion strength for cementitious adhesives
| BS EN 1348 | Active
|
- Ceramic tiles. Grouts and adhesives Part 2: Test methods for adhesives Clause 4.4: Determination of tensile adhesion strength (C).
| BS ISO 13007 Part 2 Clause 4.4 | Active
|
| - Steel for the reinforcement and pre-stressing of concrete Part 1: Test methods. Reinforcing bars, wire rod and wire (Tensile properties) Clause 5 – Tensile test
| BS EN ISO 15630 Part 1 Clause 5 | Active
|
- Steel for the reinforcement and pre-stressing of concrete Part 1: Test methods. Reinforcing bars, wire rod and wire (Rebend Test of Steel Bars) Clause 7: Rebend test
| BS EN ISO 15630 Part 1 Clause 7 | Active
|
- Steel for the reinforcement and pre-stressing of concrete Part 1: Test methods. Reinforcing bars, wire rod and wire (Bend Test of Steel Bars)
| BS EN ISO 15630 Part 1 Clause 6 | Active
|
- Clause 6: Bend test Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification
| BS 4449 : 1997 | Active
|
- Thermoplastic Road Marking
| - Methods of test for petroleum and its products Part 58: Determination of softening point of bitumen. Ring and ball method
| BS 2000 Part 58 | Active
|
- Hot-applied thermoplastic road marking materials Part 3: Specification for application of material to road surfaces Appendix C : Determination of relative density
| BS 3262 Part 3 APP. C AMD8785 : 1995 & AMD 10205 : 1998 | Active
|
- Hot-applied thermoplastic road marking materials Part 1: Specification for constituent materials and mixtures Appendix C: Determination of binder content; Appendix D: Determination of the grading of constituents and glass bead content
| BS 3262 Part 1 AMD 8783 : 1995 APP. C & D | Active
|
| CM-GB |
| | - Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form. Linear Shrinkage.
| ASTM C534/C534M Clause 11.4 (Oven Method) | Active
|
- Thermal performance of building materials and products -Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance. (Heat Flow Meter Method)
| BS EN 12667 | Active
|
- Thermal insulation - Determination of steady-state thermal resistance and related properties - Heat flow meter apparatus.
| ISO 8301 Amd 1:2010 (E) | Active
|
- Fire classification of construction products and building elements Part 1 : Classification using test data from reaction to fire tests
| BS EN 13501 Part 1+A1 | Active
|
- Light reflectance value (LRV) of a surface. Method of test
| BS 8493 + A1 | Active
|
- Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
| ASTM E1980 | Active
|
- Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
| ASTM C518 | Active
|
- Standard Test Methods for Water Vapor Transmission of Materials
| ASTM E96/E96M | Active
|
- Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions
| ASTM C272/C272M | Active
|
- Thermal insulating products for building applications. Determination of bending behaviour
| BS EN 12089 Method B | Active
|
- Standard Test Method for Determining the Water Vapour Sorption of Un faced Mineral Fiber Insulation
| ASTM C1104/C1104M | Active
|
- Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
| ASTM C303 | Active
|
- Standard Test Method for Measuring Compressive Properties of Thermal Insulations
| ASTM C165 Procedure A/B | Active
|
- Standard Test Methods of Testing Cellular Glass Insulation Block
| ASTM C240 Clause 5.3 | Active
|
- Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications Clause 11.4: Binder Content
| ASTM C1139 Clause 11.4 | Active
|
- Methods of test for inorganic thermal insulating materials Section 3: Bulk Density Preformed flat material
| BS 2972 Section 3 | Active
|
- Thermal insulating products for building applications. Determination of squareness
| BS EN 824 | Active
|
- Thermal insulating products for building applications. Determination of flatness
| BS EN 825 | Active
|
- Methods of test for thermal insulating materials Section 18: Flexural Strength
| BS 2972 Section 18 | Active
|
- Methods of test for thermal insulating materials Section 11: Moisture content as received
| BS 2972 Section 11 | Active
|
- Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
| ASTM C1335 | Active
|
- Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
| ASTM C1304 | Active
|
- Thermal insulating products for building applications. Determination of tensile strength parallel to faces
| BS EN 1608 | Active
|
- Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation Clause 9: Workmanship, Finish & Appearance
| ASTM C578 Clause 9 | Active
|
- Standard Test Method for Apparent Density of Rigid Cellular Plastics
| ASTM D1622 | Active
|
- Standard Test Method for Compressive Properties of Rigid Cellular Plastics (Forces greater than 20kN)
| ASTM D1621 | Active
|
- Thermal insulating products for building applications. Determination of the apparent density
| BS EN 1602 | Active
|
- Thermal insulating products for building applications. Determination of thickness
| BS EN ISO 29466 | Active
|
- Thermal insulating products for building applications. Determination of length and width
| BS EN 822 | Active
|
- Thermal insulating products for building applications. Determination of long term water absorption by immersion
| BS EN 16535 cl. 4.1 & CL. 4.2 | Active
|
- Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion
| BS EN ISO 29767 | Active
|
- Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
| BS EN 1604 | Active
|
- Standard Test Methods for Cellulosic Fiber Insulating Board Clause 14: Water Absorption
| ASTM C209 Clause: 14 | Active
|
- Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation Procedure A: One piece pipe section
| ASTM C302 Procedure A | Active
|
- Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
| ASTM C167 | Active
|
- Thermal insulating products for building applications. Determination of compression behaviour
| BS EN 826 | Active
|
- Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Part 2: Single-flame source test
| BS EN ISO 11925 Part 2 | Active
|
- Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
| ASTM D2126 | Active
|
- Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
| ASTM C203 | Active
|
- Methods of test for Inorganic thermal insulating materials. Section 16: Determination of organic matter.
| BS 2972 Section 16, Method 1 | Active
|
- Methods of test for Inorganic thermal insulating materials. Section 3: Bulk density (preformed materials - pipe section)
| BS 2972 Section 3 | Active
|
- Glass in building Determination of thermal transmittance (U value) - Calculation method
| DIN EN 673 | Active
|
- Glass in building - Determination of luminous and solar characteristics of glazing Clause 5.7: Shading Coefficient of glass
| DIN EN 410 Clause 5.7 | Active
|
- Glass in building - Determination of luminous and solar characteristics of glazing Clause 5.2: Light Transmittance of glass
| DIN EN 410 Clause 5.2 | Active
|
- Aluminium composite cladding panels
| - Standard Test Method for Determination of Thickness of Aluminum Composite Panel (ACP)
| DMS 030 | Active
|
- Standard Test Method for Determination of Length and Width of Aluminum Composite Panel (ACP)
| DMS 028 | Active
|
- Standard Test Method for Determination of Mass Per Unit Area of Aluminum Composite Panel (ACP)
| DMS 029 | Active
|
| - Flexible sheets for waterproofing Part 1: Determination of tensile properties. Bitumen sheets for roof waterproofing
| BS EN 12311 Part 1 | Active
|
- Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
| ASTM D4073 | Active
|
- Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material Clause 16: Compound Stability
| ASTM D5147 Clause 16 | Active
|
| - Standard Test Method for Grab Breaking Load and Elongation of Geo textiles
| ASTM D4632 | Active
|
| | - Determination of Volatile Organic Compounds (VOC) content in various materials or coatings by difference method"
| DMS 0033 | Active
|
- Paints and varnishes Part 1: Determination of volatile organic compound (VOC) content. Difference method
| BS EN ISO 11890 Part 1 | Active
|
- Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings
| ASTM D6191 | Active
|
| - ISO 3856: Paints and varnishes-Determination of "soluble" metal content Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form -- Diphenylcarbazide spectrophotometric method
| ISO 3856 Part 5 | Active
|
- Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Part B10: Determination of hexavalent chromium content of solid matter
| BS 3900 Part B10 | Active
|
- Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
| ASTM D5910 | Active
|
| | - Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
| ASTM C177 | Active
|
- Thermal insulation. Determination of steady-state thermal resistance and related properties. Guarded hot plate apparatus
| ISO 8302 | Active
|
| - Thermoplastics pipes – Longitudinal reversion – Test method and parameters
| BS EN ISO 2505 Part 5 | Active
|
- Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing Clause 5.1: Surface Condition
| DIN 8078 Clause 5.1 | Active
|
- Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing Clause 5.2: Dimensions
| DIN 8078 Clause 5.2 | Active
|
- Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing Clause 5.3: Out-of-roundness (ovality)
| DIN 8078 Part 9 Clause 5.3 | Active
|
- Wood- Based Panels - Determination of Moisture Content
| BS EN 322 | Active
|
