| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Metallurgy |
| - Carbon and low alloy steel
| - Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry (C, Si, Mn, P, S, Cr, Mo, Ni, Al, Cu, V, Nb, N)
| Internal - MMTSL-AUH-SOP 031 | Active
|
- Stainless & High Alloy Steels
| - Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry (C, Si, Mn, P, S, Cr, Mo, Ni, Cu, V, Ti, N)
| Internal - MMTSL-AUH-SOP 031 | Active
|
| | - Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 3: Field joint coatings Inspection of thickness
| ISO 21809 Part 3 Annex B | Active
|
- Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems Part 3: Field joint coatings Holiday detection test
| ISO 21809 Part 3 Annex C | Active
|
| - Metals, Alloys and Metal Products
| - Standard Test Methods and Definitions for Mechanical Testing of Steel Products -Charpy Impact (ambient to -140°C & -196°C)-upto 240 J
| ASTM A370 | Active
|
- Standard Test Methods for Notched Bar Charpy Impact Testing of Metallic Materials (ambient to -140°C & -196°C)-upto 240 J
| ASTM E23 | Active
|
- Metallic materials. Charpy pendulum impact test. Part 1: Test method (ambient to -140°C & -196°C)- upto 240 J
| BS EN ISO 148 Part 1 | Active
|
- Standard Test Methods and Definitions for Mechanical Testing of Steel Products at ambient temperature-Tensile test (upto 1000kN)
| ASTM A370 | Active
|
- Standard Test Methods for Tension Testing of Metallic Materials ambient temperature (upto 1000kN)
| ASTM E8/E8M | Active
|
- Metallic materials -Tensile testing Part 1: Method of test at room temperature (upto 1000 kN)
| BS EN ISO 6892 Part 1 | Active
|
- Metallic materials-Brinell hardness test Part 1- Test Method (HBW 2.5/187.5)
| ISO 6506 Part 1 | Active
|
- Standard Test Methods for Rockwell Hardness of Metallic Materials -HRC & HRBW
| ASTM E18 | Active
|
| ISO 6508 Part 1 | Active
|
- Standard Test Methods for Brinell Hardness of Metallic Materials, (HBW 2.5/187.5)
| ASTM E10 | Active
|
| - Qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators-Charpy Impact (ambient to -140°C & -196°C)- upto 240 J
| ASME Sec IX | Active
|
- Qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators-Tensile test (upto 1000kN)
| ASME Sec IX | Active
|
- Qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators - Bend Test
| ASME Sec IX | Active
|
- Qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators -Fillet Fracture test
| ASME Sec IX | Active
|
- Steel structural Welding Code Steel-Charpy Impact (ambient to -140°C & -196°C)-upto 240 J
| AWS D1.1/D1.1M | Active
|
- Steel structural Welding Code Steel-Tensile test (upto 1000kN)
| AWS D1.1/D1.1M | Active
|
- Steel structural Welding Code Steel-Bend Test
| AWS D1.1/D1.1M | Active
|
- Steel structural Welding Code Steel -Fracture test
| AWS D1.1/D1.1M | Active
|
- Welding of Pipelines and Related Facilities- Tension test at room temperature (upto 1000 kN)
| API 1104 22nd Edition | Active
|
- Welding of Pipelines and Related Facilities - Bend test
| API 1104 22nd Edition | Active
|
- Welding of pipelines and related facilities -Fillet Fracture test
| API 1104 22nd Edition | Active
|
- Welding of pipelines and related facilities -Nick Break test
| API 1104 22nd Edition | Active
|
- Destructive tests on welds in metallic materials - Bend tests
| BS EN ISO 5173 | Active
|
- Standard Test Method for Guided Bend Test for Ductility of Welds
| ASTM E190 | Active
|
- Carbon steel for the reinforcement of concrete
| - Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product Specification. Tension test at room temperature (upto 1000 kN)
| BS 4449+A3 | Active
|
- Polyethylene (PE) pipes and fittings
| - Polyethylene (PE) pipes and fittings -Determination of the tensile strength and failure mode of test pieces from a butt-fused joint-at room temperature (upto 1000 kN)
| ISO 13953 | Active
|
- Metals, Alloys and Metal Products & Weldment
| - Standard Test Method for Knoop and Vickers Hardness of Materials - Vickers Hardness test (HV5, HV10 & HV30)
| ASTM E92 | Active
|
- Metallic materials - Vickers hardness test Part 1: Test method - (HV5, HV10 & HV30)
| ISO 6507 Part 1 | Active
|
| - Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems Part 3: Field joint coatings Impact test
| ISO 21809 Part 3 Annex D | Active
|
- Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems Part 3: Field joint coatings Peel strength test
| ISO 21809 Part 3 Annex E | Active
|
- Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems Part 3: Field joint coatings Lap shear strength
| ISO 21809 Part 3 Annex H | Active
|
| - Pull-Off Strength of Coatings Using Portable Adhesion Testers
| ASTM D 4541 Method B | Active
|
- Coating, paint, Varnishes
| - Paints and Varnishes – Pull-Off Test for Adhesion
| ISO 4624 Method B | Active
|
| | - Qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators - Macroscopic and microscopic examination
| ASME Sec IX | Active
|
- Steel Structural steel welding - Macroscopic and microscopic examination
| AWS D1.1/D1.1M | Active
|
- Welding of pipelines and related facilities -Macroscopic examination
| API 1104 22nd Edition | Active
|
- Metals, Alloys and Metal Products
| - Standard Test Methods for Determining Average Grain Size-Linear intercept procedure
| ASTM E112 | Active
|
- Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
| ASTM E562 | Active
|
- Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
| ASTM A923 Method A & C | Active
|
| - Pipe line & pressure vessel steels
| - Standard Test Method-Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking (HIC)
| NACE TM 0284 | Active
|
- Austenitic stainless steels
| - Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
| ASTM A262 Practice E | Active
|
- Wrought nickel and chromium bearing alloys
| - Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
| ASTM G28 Method A | Active
|
- Stainless steels, Nickel base and chromium bearing alloys
| - Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution Pitting resistance Test
| ASTM G48 Method A | Active
|
- Metals, Alloys & Weldments
| - Laboratory Testing of Metals for Resistance to Specific Forms of Environmental Cracking in H₂S Environments
| NACE TM 0177 | Active
|
- Standard Practice for Preparation and Use of Bent-Beam Stress Corrosion Test Specimens
| ASTM G39 | Active
|
- Metals, Alloys and Metal Products
| - Corrosion of metals and alloys Stress corrosion testing Part 2: Preparation and use of bent-beam specimens
| ISO 7539 Part 2 | Active
|
- Metals, Alloys, Metal Products and Weldments
| - Four-Point Bend Testing of Metallic Materials for Oil & Gas Applications
| NACE TM0316 | Active
|
- A test method to determine the susceptibility to cracking of line pipe steels in sour service (Full Ring Test) Excluding NDT
| HSE OTI 95 635 By copies Ltd. for the Health and Safety | Active
|
- Full ring ovalization test for determining the susceptibility to cracking of linepipe steels in sour service – Test method Excluding NDT
| BS 8701 | Active
|
| - Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems Part 3: Field joint coatings
| ISO 21809 Part 3 Annex G | Active
|
| - Standard Practice for Operating Salt Spray (Fog) Apparatus
| ASTM B117 | Active
|
