| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Metallurgy |
| | - Standard test methods and definitions for mechanical testing of steel products - Impact test
| ASTM A370 | Active
|
- Standard test methods for Notched bar Impact testing of metallic material - Charpy impact (Ambient to -60°C & -196°C)
| ASTM E23 | Active
|
- Standard test methods and definitions for mechanical testing of steel products - Tension test - up to 600 KN
| ASTM A370 | Active
|
- Standard test methods for Tension Testing of Metallic Materials - up to 600 KN
| ASTM E8/E8M | Active
|
- Metallic Materials-Tensile testing - Part 1: Method of test at room temperature - up to 600 KN
| EN ISO 6892 Part 1 | Active
|
- Standard test methods and definitions for mechanical testing of steel products - Brinell Hardness test - HBW (10/3000)
| ASTM A370 | Active
|
- Standard test methods for Brinell Hardness of Metallic Materials HBW (10/3000)
| ASTM E10 | Active
|
- Standard test methods for Rockwell and Brinell Hardness of Metallic Materials by Portable hardness testers- Brinell: HBW (10/3000)
| ASTM E110 | Active
|
- Standard test methods and definitions for mechanical testing of steel products - Rockwell hardness test - (HRB & HRC)
| ASTM A370 | Active
|
- Standard test methods for Rockwell hardness of Metallic Materials (HRB & HRC)
| ASTM E18 | Active
|
- Standard test methods and definitions for mechanical testing of steel products - Bend test
| ASTM A370 | Active
|
- Standard specification for steel casting, general requirements, for pressure-containing parts - Bend test
| ASTM A703/ A 703M | Active
|
- Standard test methods for Bend testing of Material for ductility
| ASTM E290:22 , Indian boiler Regulation IBR:25-Section # 19 | Active
|
| - Qualification standard for welding and brazing procedure, welders, brazers, and welding and brazing operators - Bend test
| ASME SEC IX:25 - section # QW-160 , Indian boiler Regulation IBR:25-Section # 78 | Active
|
| - Carbon and Low-Alloy Steel
| - Standard test method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
| ASTM E415 | Active
|
| - Standard test methods and practices for Chemical Analysis of Steel Products
| ASTM A751 | Active
|
- Austenitic Stainless Steel
| - Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
| ASTM E 1086 | Active
|
| - Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
| ASTM E3047 | Active
|
| | - Standard test methods for Detecting Detrimental Intermatallic phase in Duplex Austenitic / Ferritic Stainless steel - Test Method A
| ASTM A923 | Active
|
- Ferrite Count Measurement as per Manual Point Count Method
| - Duplex Austenitic / Ferritic stainless steel
| - Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
| ASTM E562 | Active
|
| - Standard Practice for Detecting suceptibility to Intergranualr attack in Austenitic stainless steels
| ASTM A262 Practice A, B, C & E | Active
|
- Determination of resistance to intergranular corrosion of stainless steels: Part 1: Austenitic and ferritic-austenitic(duplex)stainless steels-Corrosion test in nitric acid medium by measurement of loss in mass. Part 2: Ferritic Austenitic & Ferritic
| ISO 3651 Part 1 Part 2 | Active
|
- Standard test methods for Detecting Detrimental Intermatallic phase in Duplex Austenitic / Ferritic Stainless steel
| ASTM A923 Method C | Active
|
- Standard test methods for Pitting and Crevice Corrosion resistance of stainless steel and related alloys by use of Ferric chloride solution
| ASTM G48 Method A | Active
|
- Standard test methods for Detecting susceptibility to Intergranualr corrosion in wrought, Nickel-Rich, Chromium - bearing Alloys
| ASTM G28 Method A | Active
|
| | - Standard Guide for Preparation of Metallographic Specimens
| ASTM E3 | Active
|
| ASM Hand book Volume 9- Ninth Edition | Active
|
