| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Annex 1 TEST |
| | - Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
| ASTM D6913/D6913M | Active
|
| - Standard Practice for Sampling Aggregates
| ASTM D75 | Active
|
- Standard Practice for Reducing Samples of Aggregate to Testing Size
| ASTM C702 | Active
|
- Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
| ASTM D2216 | Active
|
- Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve
| ASTM D1140 | Active
|
- Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
| ASTM C136 | Active
|
- Standard Test Method for Materials Finer than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
| ASTM C117 | Active
|
- Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
| ASTM D4318 | Active
|
- Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
| ASTM C127 | Active
|
- Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
| ASTM D1557 | Active
|
- Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
| ASTM D1883 | Active
|
- Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
| ASTM D4253 | Active
|
- Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
| ASTM D4254 | Active
|
- Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
| ASTM D6938 | Active
|
- Concrete, Mortar and Grout
| - Standard Practice for Sampling Freshly Mixed Concrete
| ASTM C172 | Active
|
- Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
| ASTM C1064 | Active
|
- Standard Test Method for Slump of Hydraulic-Cement Concrete
| ASTM C143 | Active
|
- Standard Practice for Making and Curing Concrete Test Specimens in the Field
| ASTM C31 | Active
|
- Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
| ASTM C511 | Active
|
- Standard Practice for Capping Cylindrical Concrete Specimens
| ASTM C617 | Active
|
- Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
| ASTM C1231 | Active
|
- Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
| ASTM C39 | Active
|
- Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
| ASTM C109 | Active
|
