| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Construction Materials |
| | - Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
| ASTM C1202 | Active
|
| - Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests (Determination of Acid-soluble chloride content)
| BS 1377 Part 3 Clause 9.3 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests: - Determination of the sulphate content of soil and ground water - Preparation of soil and its Acid extract
| BS 1377 Part 3 Clause 7.9 | Active
|
| - Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests (Determination of pH value)
| BS 1377 Part 3 Clause 12 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests (Determination of water-soluble chloride content)
| BS 1377 Part 3 Clause 9 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of the sulphate content of soil and ground water - Gravimetric method for analysis of acid or water extract or ground water
| BS 1377 Part 3 Clause 7.8 | Active
|
| | - Testing Concrete Part 111: Method of normal curing of test specimens (20°C method)
| BS 1881 Part 111 | Active
|
- Testing concrete Part 114: Methods for determination of density of hardened concrete
| BS 1881 Part 114 | Active
|
- Testing concrete Part 116: Method for determination of compressive strength of concrete cubes
| BS 1881 Part 116 | Active
|
- Testing hardened concrete Part 8: Depth of penetration of water under pressure
| BS EN ISO 12390 Part 8 | Active
|
- Testing concrete Part 122: Method for determination of water absorption
| BS 1881 Part 122 +A1 | Active
|
- Testing concrete Part 208: Recommendations for the determination of the initial surface absorption of concrete
| BS 1881 Part 208 | Active
|
| - Testing concrete in structures. Cored specimens. Part 1: Taking, examining and testing in compression
| BS EN 12504 Part 1 | Active
|
| - Precast concrete masonry units Part 1: Specification for precast concrete masonry units- Measurement of dimension
| BS 6073 Part 1 Appendix A | Active
|
- Precast concrete masonry units Part 2: Method for specifying precast concrete masonry units- Routine rapid control test of compressive strength
| BS 6073 Part 2 Appendix B | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks- Determination of compressive strength
| BS 6717 Part 1 Annex B | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks- Measurement of dimension and plan area
| BS 6717 Part 1 Annex A | Active
|
| - Methods of test for Soils for civil engineering purposes Part 4: Compaction-related tests. Determination of the California Bearing Ratio (CBR)
| BS 1377-2 ,Clause 15 | Active
|
- Methods of test for soils for civil engineering purposes Part 9: In-situ tests (Sand replacement method suitable for fine, medium and coarse grained soils (large and small pouring cylinder method)
| BS 1377 Part 9 Clause 2.2 | Active
|
- Methods of test for Soils for civil engineering purposes Part 4: Compaction-related tests. Determination of dry density/moisture content relationship: - Method using 4.5 kg rammer for soils with particles up to medium-gravel size - Method using 4.5 kg rammer for soils with some coarse gravel-size particles
| BS 1377-2 ,Clause 11.5 and 11.6 | Active
|
- Methods of test for Soils for civil engineering purposes Part 2 : Determination of water content
| BS 1377-2 Clause 4 / BS EN 17892-1 | Active
|
- Methods of test for Soils for civil engineering purposes Part 2: Classification tests Determination of particle size distribution- Wet sieving method & Dry Sieving Method
| BS 1377 Part 2 Clause 10/BS EN 17892-4, Clause 5.2 | Active
|
| - Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification Steel tensile strength test- Carbon Steel Bars for the reinforcement of Concrete
| BS 4449+A3 BS EN 10002-1 | Active
|
- Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification Steel rebend tests- Carbon Steel Bars for the reinforcement of Concrete
| BS 4449+A3 BS EN 10002-1 | Active
|
| Geotechnical Investigation |
| | - Code of Practice for Site Investigations Section 3: Field Investigations Clause 23.2: Methods of determining ground water pressures Section 4 Field Tests Clause 27.5: Observation wells Section 7 Reports and interpretation Clause 47.2.7 : incidence and behavior of groundwater
| BS 5930 Clause 47.2.7 | Active
|
| - Code of Practice for Site Investigations Section 8 Ground water measurements Clause 52.2:52.3: Observation wells installed in boreholes and excavations Section 10 Reports and interpretation Clause 63.2.5 : incidence and behavior of groundwater
| BS 5930 +A1 Clause 52.2;52.3 Clause 63.2.5 | Active
|
- Code of Practice for Site Investigations Section 4.Explatory holes Clause 26.4 Ground water sampling
| BS 5930 +A1 Clause 26.4 | Active
|
| - Code of Practice for Site Investigations Section 4. Explatory holes Clause 25: Sampling the ground
| BS 5930 +A1 Clause 25 | Active
|
- Methods of test for soils for civil engineering purposes
| BS 1377 Part 9 Section 3.3 | Active
|
- Code of Practice for Site Investigations Part 9: In-situ tests In Situ penetration test-Determination of the penetration resistance using the split barrel sampler (the standard penetration test SPT)
| BS 5930 +A1 Clause 41 Cone test | Active
|
- Code of Practice for Site Investigations Section 6. Description of soils and rocks Clause 33 : Description of soils
| BS 5930 +A1 Section 33 | Active
|
| - Code of Practice for Site Investigations Section 6. Description of soils and rocks Clause 36 : Description of rock masses - Rock quality designation
| BS 5930 +A Clause 36.4.4 | Active
|
- Code of Practice for Site Investigations Section 6. Description of soils and rocks Clause 36.4.4 : Description of rock masses - Core Recovery
| BS 5930 +A1 Clause 36.4.4 | Active
|
- Code of Practice for Site Investigations Rotary Core Drilling
| BS 5930 +A1 Clause 24.11.3 | Active
|
- Code of Practice for Site Investigations Section 10. Reports and interpretation
| BS 5930 +A1 Section 10 | Active
|
| - Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under varying states of stress and temperatures
| ASTM D7012 | Active
|
- Standard Practices for Preparing Rock Core as cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
| ASTM D4543 | Active
|
- Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
| ASTM D2216 | Active
|
| | - Standard Test Method for Electrical Indication of concrete's Ability to Resist Chloride Ion Penetration
| ASTM C1202 | Active
|
| - Methods of test for Soils for civil engineering purposes Part 3 : Chemical and electro-chemical tests (Determination of pH value)
| BS 1377 Part 3 Clause 12 | Active
|
- Methods of test for Soils for civil engineering purposes Part 3 : Chemical and electro-chemical tests (Determination of water-soluble chloride content)
| BS 1377 Part 3 Clause 9.2 | Active
|
- Methods of test for soils for civil engineering purposes Part 3 : Chemical and electro-chemical tests (Determination of water soluble sulphate content of soil ) Preparation of soil and its water extract
| BS 1377 Part 3 Clause 7.3,7.6 | Active
|
- Method of test for civil Engineering purposes Gravimetric method for analysis of acid extract Part 3 Chemical and electrochemical tests Clause 9.3: Determination of acid soluble chloride content Claouse 7.9: Determination of acid soluble sulphate content
| BS 1377 Part 3 clause 9.3 and Clause7.9 | Active
|
| - Methods of test for soils for civil engineering purposes Part 3 : Chemical and electro-chemical test (Determination of pH value)
| BS 1377 Part 3 Clause 12 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests (Determination of chloride content of ground water)
| BS 1377 Part 3 Clause 9.2 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of the sulphate content of ground water
| BS 1377 Part 3 Clause 7.6 & 7.8 | Active
|
