| Type of Activity |
Test Materials / Products |
Test Name |
Test Method |
Status |
| Construction Materials |
| | - Standard Test Method for Water Absorption of Plastics
| ASTM D570 | Active
|
- Special Directive for the Assessment of Reinforced Water proof Covering of Atactic Polypropylene (APP) polymer Bitumen and Styrene Butadiene-styrene(SBS) Elastomeric Bitumen- Heat Resistance
| European Union of Agreement, UEA tc M.O.AT 30 & 31 Para E | Active
|
- Flexible sheets for waterproofing. Determination of tensile properties. Bitumen sheets for roof waterproofing
| EN 12311-1 | Active
|
- Standard Test Methods for Water Vapor Retarders Used in Contact with Earth under Concrete Slabs, on Walls, or as Ground Cover- Resistance to Puncture
| ASTM E154 section 10 | Active
|
- General Directive for the assessment of Roof Waterproof Systems- Resistance to static Indentation
| European Union of Agreement, UEA tc M.O.A.T No. 27 Para 5.1.9 | Active
|
- Flexible sheets for waterproofing Part 1: Bitumen sheets for roof waterproofing – Test for determination of resistance to tearing (nail Shank)
| EN 12310-1 | Active
|
- General Directive for the assessment of Roof Waterproof Systems- Test for resistance to tearing
| European Union of Agreement, UEA tc M.O.A.T No. 27 Para 5.4.1 | Active
|
- Special Directive for the Assessment of Reinforced Waterproof Covering of Atactic Polypropylene (APP) polymer Bitumen and Reinforce homogenouswaterproof covering of Styrene Butadiene-Styrene (SBS) Elastomer Bitumine Tensile strength at break elongation at Break
| European Union of Agreement, UEA tc M.O.A.T No. 30 & 31 Para C | Active
|
- Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material Load Strain Properties & Tear strength
| ASTM D5147 Clause: 7 & Clause: 8 | Active
|
- Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Bitumen sheets for roof waterproofing
| EN 1849-1 | Active
|
- Special Directive for the Assessment of Reinforced Water proof Covering of Atactic Polypropylene(APP) Polymer Bitumen and reinforced homogenous water proof covering of Styrene Butadiene-styrene(SBS) Elastomeric Bitumen. Determination of thickness and mass per unit area
| European Union of Agreement, UEA tc M.O.A.T No. 30 & 31 Para A & B | Active
|
- Special Directive for the Assessment of Reinforced Water proof Covering of Styrene Butadiene-styrene(SBS) Elastomeric Bitumen- Reinforcement
| European Union of Agreement, UEA tc M.O.AT 31, Para f UEA technical guide for the assessment of roof water proofing system Method A | Active
|
- Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
| ASTM D4073 | Active
|
| - Method of testing plastics, Mechanical properties, Tensile strength, Elongation and Elastic Modulus- Tensile strength and elongation test
| BS 2782 Part 3 Method 320C | Active
|
- Standard Test Method for Rubber Property- Durometer Hardness Shore A hardness
| ASTM D2240 Shore A | Active
|
- Geo Synthetics/ Geotextiles
| - Geo synthetics. Static puncture test (CBR test)
| BS EN ISO 12236 | Active
|
- Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
| ASTM D4833 | Active
|
- Standard Test Method for Trapezoid Tearing Strength of Geotextiles
| ASTM D4533 | Active
|
| - Testing hardened concrete. Depth of penetration of water under pressure
| BS EN ISO 12390 Part 8 | Active
|
- Testing concrete; testing of hardened concrete (specimens prepared in mould) Depth of penetration of water under pressure
| DIN 1048 Part 5 | Active
|
- Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
| ASTM D5882 | Active
|
- Testing concrete Part 122: Method for determination of water absorption
| BS 1881 Part 122 | Active
|
- Part 111: Method of normal curing of test specimens (20°C method) Part 114: Methods for determination of density of hardened concrete Part 116: Method for determination of compressive strength of concrete cubes
| BS 1881 Part 111 AMD 9387 BS 1881 Part 114 AMD 6721 BS 1881 Part 116 AMD 6097 & AMD 6720 | Active
|
- Testing concrete Part 208: Recommendations for the determination of the initial surface absorption of concrete
| BS 1881 Part 208 | Active
|
- Testing hardened concrete Part 2: Making and curing specimens for strength tests
| BS EN ISO 12390 Part 2 | Active
|
| - Specification for Carbon steel bars for the reinforcement of concrete- Steel bend tests
| BS 4449 Appendix C, Clause C.1.6.1 | Active
|
- Specification for Carbon steel bars for the reinforcement of concrete- Steel tensile strength test
| BS 4449 Annex E Clause E.1.4 BS EN 10002-1 | Active
|
- Specification for Carbon steel bars for the reinforcement of concrete- Steel re-bend tests
| BS 4449 Annex E Clause E.1.6 | Active
|
- Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification Steel for the reinforcement and pre stressing of concrete. Test methods. Reinforcing bars, wire rod and wire Re bend Test
| BS 4449 +A3 BS EN ISO 15630 - 1 | Active
|
- Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification Steel for the reinforcement and pre stressing of concrete. Test methods. Reinforcing bars, wire rod and wire Tensile & Elongation
| BS 4449 +A3 BS EN ISO 15630 - 1 | Active
|
| - Methods of test for soils for civil engineering purposes Part 9: In-situ tests (Sand replacement method suitable for fine, medium and coarse grained soils (large and small pouring cylinder method)
| BS 1377 Part 9 Clause 2.1 & Clause 2.2 AMD 8264 | Active
|
- Methods of test for Soils for civil engineering purposes Part 4: Compaction-related tests. Determination of the California bearing ratio (CBR): - Preparation of test sample - Soaking
| BS 1377 Part 4 Clause 7 AMD 13925 | Active
|
- Methods of test for Soils for civil engineering purposes Part 2: Classification tests Determination of the liquid limit - Cone penetrometer method (definitive method)
| BS 1377 Part 2 Clause 4.3 AMD 9027 | Active
|
- Methods of test for Soils for civil engineering purposes Part 4: Compaction-related tests. Determination of dry density/moisture content relationship: - Method using 4.5 kg rammer for soils with particles up to medium-gravel size - Method using 4.5 kg rammer for soils with some coarse gravel-size particles
| BS 1377 Part 4 Clause 3.5 and Clause 3.6 AMD 13925 | Active
|
- Methods of test for Soils for civil engineering purposes Part 2: Classification tests Determination of particle size distribution- Wet sieving method & Dry Sieving Method
| BS 1377 Part 2 Clause 9.2 & Clause 9.3 AMD 9027 | Active
|
- Methods of test for soils for civil engineering purposes Part 2: Classification tests Determination of Plastic Limit and Plasticity Index - Method for plastic limit - Derivation of plasticity index and liquidity index
| BS 1377 Part 2 Clause 5.3 & Clause 5.4 AMD 9027 | Active
|
| - Testing aggregates Part 103: Methods for determination of particle size distribution Section 103.1 Sieve tests
| BS 812 Part 103 Section 103.1 Clause 7.2 and 7.3 AMD 6003 | Active
|
- Standard Test Method for Materials Finer than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
| ASTM C117 | Active
|
- Standard Test Method for Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
| ASTM C127 | Active
|
- Standard Test Method for Relative Density (Specific Gravity), and Absorption of Fine Aggregate
| ASTM C128 | Active
|
- Testing aggregates Part 105: Methods for determination of particle shape Section 105.1 Flakiness index
| BS 812 Part 105 Section 105.1 | Active
|
- Testing aggregates Part 105: Methods for determination of particle shape Section 105.2 Elongation index of coarse aggregate
| BS 812 Part 105 Section 105.2 | Active
|
| - Precast concrete masonry units Part 1: Specification for precast concrete masonry units- Measurement of dimension
| BS 6073 Part 1 Appendix A AMD 4462 | Active
|
- Precast Concrete Masonry Units Part 2: Method For Specifying Precast Concrete Masonry Units- Routine rapid control test of compressive strength of blocks by manufacturer (fibre board test)
| BS 6073 Part 2 Appendix B AMD 4508 | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks- Determination of compressive strength
| BS 6717 Part 1 Annex B | Active
|
- Precast concrete paving blocks Part 1: Specification for paving blocks- Measurement of dimension and plan area
| BS 6717 Part 1 Annex A | Active
|
- Precast concrete masonry units - Part 2: Method for specifying precast concrete masonry units Determination of Concrete Density of Hollow Block
| BS 6073 Part 2 Annex C AMD 4508 | Active
|
| - Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
| ASTM D7012 Method C | Active
|
- Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
| ASTM D4543 | Active
|
| | - Glass in building. Determination of thermal transmittance (U value). Calculation method
| EN 673 / Ashrae | Active
|
- Glass in building. Determination of luminous and solar characteristics of glazing Determination of solar direct transmittance, Direct reflectance, Direct Absorptance, total solar energy transmittance, shading Co-efficient
| EN 410 Clause 4.4 | Active
|
- Glass in building. Determination of luminous and solar characteristics of glazing Determination of visible light properties (light transmittance, light reflection)
| EN 410 Clause 4.2 & Clause 4.3 | Active
|
| | - Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of the sulphate content of soil (Acid Soluble & Water Soluble)
| BS 1377 Part 3+A1 Clause 7 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests- Determination of the organic matter content
| BS 1377 Part 3 Clause 4 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of the chloride (Acid Soluble & Water Soluble)
| BS 1377 Part 3 Clause 9 | Active
|
- Methods of test for Soils for civil Engineering purposes Part 3: Chemical and electro-chemical Tests Determination of the pH value
| BS 1377 Part 3 Clause 12 | Active
|
- Total Dissolved Solids of Soil
| SOP31/Earth Manual (Designation E-8) | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical testing Carbonate Content of Soil
| BS 1377 Part 3+A1 | Active
|
| - Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests- Determination of pH value
| BS 1377 Part 3+A1 Clause 12 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests Determination of the sulphate content ground water
| BS 1377 Part 3 Clause 7 | Active
|
- Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests- Determination of the chloride content
| BS 1377 Part 3+A1 Clause 9 | Active
|
| - Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
| ASTM C1202 | Active
|
| - Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry for C, S, P, N, Mn ,Cr, Mo, V, Ni, Cu+(CEV)
| MLD GMS based on ASTM E415 | Active
|
| - Non load bearing Concrete blocks, Wall
| - Fire resistance tests for non-load bearing elements. Part 1. Walls Performance criteria Integrity ,Insulation and Radiation
| BS EN 1364-1 Including the relevant requirements of BS EN 1363-1 and BS EN 1363-2 | Active
|
- Doors, Shutters and open able windows
| - Fire resistance and smoke control tests for door and shutter assemblies, open able windows and elements of building hardware. Fire resistance test for door and shutter assemblies and open able windows Performance criteria Integrity ,Insulation and Radiation
| BS EN 1634-1 Including the relevant requirements of BS EN 1363-1 and BS EN 1363-2 | Active
|
- Building materials and structures
| - Fire tests on building materials and structures- method for determination of the fire resistance of elements of construction (general principles) (non load bearing only) Performance criteria Integrity ,Insulation and Radiation
| BS 476.20 | Active
|
- Fire tests on building materials and structures- method for determination of the fire resistance of non-load bearing elements of construction Performance criteria Integrity ,Insulation and Radiation
| BS 476.22 | Active
|
- Fire-resistance tests -Elements of building construction - Part 1: General requirements (non load bearing only) Performance criteria Integrity ,Insulation and Radiation
| ISO 834-1 | Active
|
- Fire-resistance tests -- Elements of building construction -- Part 8: Specific requirements for non-load bearing vertical separating elements Performance criteria Integrity ,Insulation and Radiation
| ISO 834-8 | Active
|
| - Fire resistance tests- Door and shutter assemblies. Performance criteria Integrity ,Insulation and Radiation
| ISO 3008 | Active
|
- Building construction – glazed elements
| - Fire-resistance tests - Elements of building construction - Glazed elements Performance criteria Integrity ,Insulation and Radiation
| ISO 3009 | Active
|
- Fire Testing for Building Materials and Products
| | - Fire Tests of Door Assemblies
| UL 10B | Active
|
- Positive Pressure Fire Tests of Door Assemblies
| UL 10C | Active
|
- Building materials and structures
| - Fire tests of building construction and materials (non-load bearing vertical elements only)
| UL 263 | Active
|
- Standard Test Methods for Fire Tests of Building Construction and Materials (non-load bearing vertical elements only)
| ASTM E119 | Active
|
- Application of Hose Stream
| - Standard Practice for Application of Hose Stream
| ASTM E2226 | Active
|
| | - Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
| BS EN ISO 9239 Part 1 | Active
|
- Reaction to fire tests — Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
| EN ISO 11925 Part 2 | Active
|
- Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
| BS EN ISO 1716 | Active
|
- Reaction to fire tests for products — Non-combustibility test
| BS EN ISO 1182 | Active
|
- Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item
| BS EN 13823+A1 | Active
|
- Standard Test Method for Determining Ignition Temperature of Plastics
| ASTM D1929 | Active
|
- Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
| ASTM E648 | Active
|
- Reaction to Fire Test: Fire Tests for Flame Propagation of Textiles and Films
| NFPA 701 (2023) (method 1 & method 2) excluding accelerated dry cleaning and accelerated laundering procedures | Active
|
- Furniture. Assessment of the ignitability of upholstered furniture - Ignition source smouldering cigarette
| BS EN 1021 Part 1 | Active
|
- Furniture. Assessment of the ignitability of upholstered furniture. Ignition source match flame equivalen
| BS EN 1021 Part 2 | Active
|
- Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources
| BS 5852 | Active
|
- Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests
| EN 13501 Part 1 | Active
|
- Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
| BS 7176+A1 | Active
|
- Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C
| ASTM E136 | Active
|
| Geotechnical Investigation |
| | - Code of practice for site investigations Section 6: Description of soils and rocks- Description of rock masses- Rock quality designation
| BS 5930 Clause 44.4.4 A2 | Active
|
- Code of practice for site investigations Section 6: Description of soils and rocks- Description of rock masses- Core recovery
| BS 5930 Clause 44.4.4 A2 | Active
|
- Code of Practice for Site Investigations- Geotechnical Reporting Section 7: Reporting
| BS 5930 Section 7 A2 (Factual Reporting only) | Active
|
| | - Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
| ASTM D7012 Method C | Active
|
- Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
| ASTM D4543 | Active
|
| | - Code of practice for site investigations- Ground water level measurement Section 3: Field investigations- Methods of determining groundwater pressures Section 4: Field tests- Observation wells Section 7: Reports and interpretation- Descriptive report
| BS 5930 Clause 23.2 & Clause 27.5 & Clause 47.2.7 A2 | Active
|
- Code of practice for site investigations Section 3: Field investigations- Groundwater samples
| BS 5930 Clause 23.3 A2 | Active
|
| - Methods of test for soils for civil engineering purposes Part 9: In-situ tests In Situ penetration test- Determination of the penetration resistance using the split-barrel sampler (the standard penetration test SPT)
| BS 1377 Part 9 Section 3.3 AMD 8264 | Active
|
- Code of practice for site investigations Section 3: Field investigations- Soil Sampling: • Light cable percussion boring Split barrel Sampling
| BS 5930 Clause 20.5 and Clause 22 A2 | Active
|
- Code of practice for site investigations Section 6: Description of soils and rocks- Soil Description • Description of soils Description and classification of rocks
| BS 5930 Section 41 &44 Clark and Walker A2 | Active
|
| Environmental |
| | | APHA-AWWA-WEF 4500 H+ | Active
|
| APHA-AWWA-WEF 2540 D | Active
|
- Biochemical Oxygen Demand
| APHA-AWWA-WEF 5210 | Active
|
| APHA-AWWA-WEF 5220 B | Active
|
| APHA-AWWA-WEF 2540C | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| APHA-AWWA-WEF 3120B | Active
|
| Air Quality Monitoring |
| | - Total Suspended Particulate Matter (TSPM)
| Internal method SOP-ENVT- 010 Based on US EPA - 40 CFR, Part 50, Appendix B | Active
|
- Respirable Particulate Matter (RSPM)
| Internal method SOP-ENVT- 010 Based on US EPA- 40 CFR, Part 50, Appendix J | Active
|
- Non Respirable Particulate Matter-NRSPM
| Internal method SOP-ENVT- 010 Based on US EPA - 40 CFR, Part 50, Appendix B | Active
|
| Internal method SOP-ENVT- 009 Based on US EPA - Designated EQUIVALENT METHOD NO. EQS-0775-002 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 008 Based on CBCP India, Vol.No.1 (National Ambient Air Quality Series,NAAQMS/36/2012-13) | Active
|
| nternal method SOP-ENVT- 016 Based on NIOSH 6015 | Active
|
| Internal Method SOP_ENVT-005 Based on USEPA EQS-0775-002 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644-8 | Active
|
| BS EN 60079-29-2 | Active
|
- Total Volatile Organic Compound (TVOC)
| Internal Method SOP-ENVT-011 Based on NIOSH 2549 | Active
|
| BS EN 60079-29-2 | Active
|
| - Particulate Matter μm size (PM0.3, PM0.5, PM1.0, PM2.5, PM5.0, PM10, TSP) in Indoor
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 1 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| Internal method SOP-ENVT- 013 Based on ISO 14644 Part 8 | Active
|
| - Bio aerosol Sampling for Total Bacteria Count and Yeast & Mold Count
| Internal method SOP-ENVT- 012 Based on NIOSH 801 Sampling Procedure | Active
|
- Stack / Flue gas Emission
| - Determination of stack gas Velocity, Temperature, Pressure and volumetric flow rate
| Internal method SOP-ENVT- 015 Based on US EPA-Method 2 | Active
|
- Determination of stack gas Moisture
| Internal method SOP-ENVT- 015 Based on US EPA-Method 2 | Active
|
- Determination of stack gas Pressure and Temperature
| Internal method SOP-ENVT- 015 Based on US EPA-Method 17 | Active
|
- Determination of Sulphur Dioxide (SO2)
| Internal method SOP-ENVT- 014 Based on US EPA-Method 6C | Active
|
- Determination of Nitrogen Dioxide (NO2)
| Internal method SOP-ENVT- 014 Based on EPA-Method 7E | Active
|
- Determination of Oxygen (O2)
| Internal method SOP-ENVT- 014 Based on US EPA-Method 3C | Active
|
- Determination of Carbon Dioxide (CO₂)
| Internal method SOP-ENVT- 014 Based on US EPA-Method 3C | Active
|
- Determination of Carbon Monoxide (CO)
| Internal method SOP-ENVT- 014 Based on US EPA-Method 10 | Active
|
- Determination of Volatile Organic Compound(VOC)
| Internal Method SOP-ENVT-006 Based on EPA-Method 00331 | Active
|
- Determination of Heavy Metals
| Internal Method SOP-ENVT-006 Based on EPA-Method 26:20016 | Active
|
- Determination of Hydrocarbon
| Internal method SOP-ENVT- 014 Based on US EPA -Method 3C | Active
|
| | - Acoustics-Description, measurement and assessment of
| Internal method SOP-ENVT- 004 Based on ISO 1996 Part 2 | Active
|
- Acoustics- Determination of Occupational Noise Exposure
| Internal method SOP-ENVT- 004 Based on ISO 1996 Part 2 | Active
|
| - Intensity Illumination Level
| SOP-ENVT-003 Based on BS 667 AS/NZS 1680.2.4 | Active
|
| - Determination of Heat Stress at work place
| SOP-ENVT-002 Based on OSHA Technical Manual 2017 Chapter 4 BS EN ISO 7243 | Active
|
